Recent content by butlerotis

I would like to buy 5000 .223 brass do you have that much?

I would buy all of the .223 brass for $750 if its worth taking care of it all at once.

Thank you for pitching in I think I am really leaning towards the 35mm now.

Ok I think that was the way I was leaning I got one price down to 7600 for the 60mm and was about to pull the trigger but wanted to be sure. Most of our shots are over 100 yard the coyotes here are skittish.

Seems like y'all both prefer the 35mm I really appreciate all the help man this is such a hard call. On the 35mm what do you think the furthest you could distinguish a coyote, a hog, and a deer would be ?

We live in Amarillo so we have alot of open area. Is the detection range really that drastic drop from the 60mm to the 35? If the 35 could detect out to 600 or 700 I might lean more towards it over the 60mm

So is there any change at all in picture quality with the smaller lens?

Money is really not the issue just making sure I am getting the best bang for my buck. What do you guys that have used both think about the 35mm vs the 60mm? Thanks!

Man yall both must have got a bad rep I got a guy sent me a free seating stem to see if it worked better before he had me send all my stuff in to them to check my issue free of charge.

Also my stem no longer leaves any marks than cant be wiped away with a cloth

For anyone still following this I For anyone still following this I follow the method of tuning my seating stem to my bullet using a drill and some polishing stuff and now it is seating so much better about 90% are coming within .0005 of each other still got a few that are a little tight that...

That was one of the first things that Forster made me do The first thing forster had me do was to take this apart and send them pictures of the bullets dropped through the sleeve he thought they might be binding but the dropped in free. while I had it apart I took a picture of the stem doesn't...

Also to add to this the issue has been getting worse and worse. Started with .002 and the .005 then .008 and most recently .015 between back to back seats

I agree with you there I need to ease up a little I think. I think that I will see how the new stem works and give Forster a chance to see if they think its my brass or something else then look into getting the stem custom machined to fit the bulelts

So the top line is from the seating die and the bottom line if from my Hornady 5-26 comparator. Which one is more correct ?