Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
My 338 Norma has a firing pin that floats so free I can hear it slide back and forth when I tip the bolt up and down. My .260 bolt is tighter and does not do that. If yours is really tight, perhaps it would leave a mark.
Feed lips worn or bent and unable to keep the top round in the mag as the bolt is in rearward motion during extraction/ejection. There’s a quick way to clear it without tools(about 5 seconds) but hard to describe. I’ll try: 1) pull back hard on charging handle. It’ll move less than an inch. 2)...
Question: do the A1 barrels fit the A2/M2 chassis? I have an A1 with 2 barrels, thinking of upgrading to the the M2 but I got such a good deal on my 338 Norma barrel, I’d like to keep it. I’d definitely lose money if I had to repurchase it.
I whipped up this little guy for my A1 a while back and thought some might like to see it. I dislike the bulky rail adaptors and this keeps my bore axis a little lower as well. Plus it was a fun project. I turned some stainless round stock down to the appropriate diameter, made a shank and...
Yes of course. I’m a seasoned reloader. But where is the real start? The max load in one book is lower than the start load in another. I will be working up, but with the cost of components, I’m trying to avoid unnecessary waste. Should I go with Hodgdon’s advice (They pointed to the Sierra...
I’m looking for data to deconflict different sources for a max load. I’m using 300gr Berger OTM with Retumbo. Standard SAAMI chamber. As you probably know, data is scarce. Sierra 6th edition lists the following: 300gr SMK 78.7gr Retumbo @ 2450fps with COAL 3.680” *But* I got this from...