Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
So, as far as the dies recommendations go I went a Redding set and that was all I could get hold. I ordered mine from precision reloading in SD, USA. Pretty much whatever I could get. Possibly talk to Wilson about some custom dies. I’m currently using ADI brass and brass after about 5...
Yeh it’s picking up I think. Everything @Gtar stated above I would agree with. It gives it tremendous appeal, in my opinion, to anyone that wants to shoot often and competitively. I have shot 223 for years and this was an entirely sensible cartridge to adopt a performance step up. I was at a...
Thanks. I’ve forgotten how to read wind well enough to hold my own in F-class. I’m using Accurate-mags, 223 3.050, in my ESS chassis. I have ground outa little the front section of the plastic lip out to extend the OAL. I brought a sample bag of the 88’s from someone to play with them out...
That’s a great SD over a 40 shot string. Great consistency. I’m assuming that is with the 88’s? How much varget are you losing to hit those velocities with 88’s and have had any pressure signs?
Thanks for the suggestion. There seems to have been a drop-off in availability for the 2206H/H4895 in and around my area. I did give 8208 some consideration when I was last in the shop. Regrettably I don’t know my free-bore. I’m probably not absolutely worried either as I’m running mag length...
Just ran through my first two day Precision Service rifle with the 223AI (open division) and the 75gn ELD-M load with great effect. Completely sold on this cartridge.
Hi all I have pulled the trigger on buying a crimson trace CT25 red dot for a Ruger Gunsite scout in 223. While nicely priced, keen to hear from anyone with experience using these red dots as to whether they are cheap and cheerful or a CrapTastic bag of trouble. Thanks in advance
I’ve been testing loads with the 75 ELD-M in 223AI to see if I can adopt them as a cheap projectile for 300-500m comps. Using mag length OALs and ADI2206H (H4895) and ADI fire formed brass went with the following loads over shot groups 24.5 /mean 2906fps / sd-12 25.0/ mean 2987fps / sd - 10...
I’m about to test the hornady 75gn BTHPs myself in my 223AI (26”, 1:7tw Tikka action). I’ll report ack what results I get. They seem very to good from a price perspective and availability is good. Pending performance I might make them my load for 500m and save the Berger 80gn VLDs for longer...
I tend to agree. I was keen to get the speed up and make use of the capacity offered by the Ackley chambering. That said there seems to be a sweet spot between 25.5 - 26.0. That would get speeds at or just short of 2900