• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by djtjr

  1. D

    Changing load for second brass firing?

    Re: Changing load for second brass firing? you should be very close from new brass i can often find my best load and not have to change anything for the second firing most of the time but to be certain i tend to verify using that load plus 2 additional strings of + and - .2 OR .3 grains...
  2. D

    How stiff is too stiff closing a bolt on a jammed

    Re: How stiff is too stiff closing a bolt on a jammed Thanks guys yes brass chambers fine without bullets, it will be separate brass for both either way wanted to save having to buy a duplicate die set and or adjust the seater every time since they both shoot the exact same load perfectly...
  3. D

    6x47Lapua with 105s. H4350 or Re 17?

    Re: 6x47Lapua with 105s. H4350 or Re 17? Varget
  4. D

    How stiff is too stiff closing a bolt on a jammed

    Guys I have a gun that is in the same chambering as another gun I have, I wanted to see if I could use the same dies and I built up a load. It just happens that the best load is the same as my other gun but the seating depth jam is a bit more as I guess one reamer is a bit different than the...
  5. D

    Lapua 260 rem neck thickness???

    Re: Lapua 260 rem neck thickness??? Thanks guys. Much appreciated
  6. D

    Lapua 260 rem neck thickness???

    Re: Lapua 260 rem neck thickness??? Sorry meant neck wall thickness I will double that add .264 and take off.002
  7. D

    Lapua 260 rem neck thickness???

    Subject says it all need to get a bushing and I forgot to mic my necks before I left my cabin. Anyone know the neck thickness on their lapua 260 brass not 308 necked down or 243 necked up just the 260 from the factory? Thanks Don
  8. D

    .300wm - .300wsm

    Re: Loads for .300WM-.300WSM WSM 168 Berger vld Win brass 215 m H-4350 65.5 gn
  9. D

    Maggie’s Gunny

    Re: Gunny He's a great guy and a great American
  10. D

    March 1 - 10x24 for Extreme range shooting?

    Re: March 1 - 10x24 for Extreme range shooting? i have a march and its a great scope and while the elevation is great its not the best for ELR shooting you just want a bit more magnification.
  11. D

    338 Norma is scary accurate...

    Re: 338 Norma is scary accurate... awesome round mine is scary accurate and not very finicky because you can seat the bullets out you really dont give mu much case capacity to the lapua but you can more easily seat to the lands and effectively play with seating depth to tweak accuracy for you...
  12. D

    Shooting Glove

    Re: Shooting Glove Creedmoor they are good people too
  13. D

    Lucas Bore Guide

    Re: Lucas Bore Guide Great bore guide I have a bunch and nothing if a better fit
  14. D

    Quietest 22-LR round

    Re: Quietest 22-LR round The cb longs are quiet but may not have the velocity u r looking for. In my 40 x trainer the wolf match extra is surprisingly quiet. I am anal about ear protection after doing damage and while it may not be what u r looking for I can shoot out of that gun all day no...
  15. D

    Anyone use a Ghillie for hunting - did it work?

    Re: Anyone use a Ghillie for hunting - did it work? Yes and with proper scent control they are deadly I have had deer walk past upwind at 20 feet and I was standing in the poem motionless on my way into my stand. They are the best camo available. For bow trim the jute where it could get in...