Recent content by DocV

  1. D

    Your PVA prefit experience

    Went to the range to fireform some brass and to zero the scope, it rained a bit when I arrived. I used a relatively clean(albeit soaked) target left by the previous folks at the 100yd line. Impacts in the lower left bull were there before I showed up. The scope was zeroed on a different part...
  2. D

    Your PVA prefit experience

    Barrel break in loads were with varying charges of 8208XBR: 21.0, 21.4, 21.8, 22.2, 22.6, 23.0gr, new Lapua brass, CCI400s, and 77gr SMKs. The load in the other image was with 23.4gr of Varget. Lapua brass on the left and IVI brass on the right, both fireformed and fully prepped. I get the...
  3. D

    FBI declares Sig 320/ ‘M17/ M18 unfit for duty

    Sigs didn't go off, the Feds were just happy to see you.
  4. D

    Your PVA prefit experience

    Called a few days ago and got my answer. Thanks for taking the time. PVA OBW Prefits at regular prices are already a good deal. At sale prices, I consider them a steal. My experiences with them have been pretty good so far, can only recommend the 223 Wylde, 6CM(PVA standard), 6.5CM, and 300...
  5. D

    PVA's 2025 "Freedom From The Crown Sale"

    Will 30" barrels be an option?
  6. D

    33xc

    It'll work on a Mausingfield, but you'll likely leave some performance on the table. Run the numbers through a ballistic calculator to see if you're ok with a 100-200fps velocity loss. David Tubb's write up on the 33XC shows the 285s@3200fps and 250s@3320-3380fps from a 28" bbl. I've seen...
  7. D

    Your PVA prefit experience

    Will 30" OBW pre-fits be an option in the future? And what happened to the Avenger? Looks like it's been removed from the site for awhile now.
  8. D

    A small election question….

    2008 - Obama 69.5 million 2012 - Obama 65.9 million 2016 - Clinton 65.8 million 2020 - Biden 81.2 million 2024 - Harris 67.9 million so far Their SD is terrible. Should've annealed with an AMP and used a better scale.
  9. D

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    Anyone get an email confirmation for their order? I've ordered in the past, small things here and there, and always got an email detailing the transaction shortly after. Haven't received anything this time.
  10. D

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    Curious to know why this type of extractor was used over the ones found in the Arch/Nuke or MF. I've seen this extractor design used in pistols, can't recall if I've ever seen it anywhere else.
  11. D

    ARC Nucleus

    What's being described sounds more like excessive firing pin drag. Some action/trigger combinations are worse than others.
  12. D

    Jam Nut for Muzzle Brake

    Re: Jam Nut for Muzzle Brake JP Enterprises jam nut: silver and black AAC sells shims, and I think Surefire does too if you want to go that route.
  13. D

    Rifle Scopes Reticle thickness on Nightforce F1?

    Re: Reticle thickness on Nightforce F1? It's what I got from Ken@NF in an email. I have the MLR personally, but based on the info he gave me I'd rather have the mil dot as well. And in case anyone's wondering what N and E are for...it's just something I use to describe parts of the reticle...
  14. D

    Rifle Scopes Reticle thickness on Nightforce F1?

    Re: Reticle thickness on Nightforce F1? NF F1 mil dot OD - .25 mil Line thickness - .113 MOA NF F1 MLR Line thickness - .25 MOA Full mil hash - .2 mil Half mil hash - .14 mil N and E hashes - .1 mil N and E hash spacing - .2 mil
  15. D

    Updated: LWRC Repr review! PICTURE HEAVY

    Re: Updated: LWRC Repr review! PICTURE HEAVY I can't speak on behalf of the OP, but this might provide more insight. http://forum.lwrci.com/newforum/viewtopic.php?f=30&t=8225 So what I gather from that is they made new lowers with different dimensions, existing lowers will always have a...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts