• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by InTheFace

  1. I

    700 sps tactical as deer gun

    Re: 700 sps tactical as deer gun It works fine. Federal 165 gamekings
  2. I

    Rifle Scopes New RR Predator Pursuit Needs optics

    Been busy with the new job and baby. My research time is short, so sorry if this subject kinda beats a dead horse. But, Need a quality scope under $400 for a varmint hunting AR. Needs to work good and look good. I like fine crosshairs or something similar that can pinpoint poor little woodland...
  3. I

    Gunsmithing New trigger for Christmas

    Wife is getting me a new trigger for Christmas. Currently have the x-mark or whatever it is on the Remington. Im looking for 1.5 lbs or so. I would like to be able to install it myself. I do want the same style safety as I have now. What options do I have? and who is the peron to buy from?
  4. I

    Rifle Scopes Proper ring spacing?

    Re: Proper ring spacing? Cool thanks
  5. I

    Rifle Scopes Proper ring spacing?

    Re: Proper ring spacing? Would there be any problem with the ring mounted at the most forward point of the rail?
  6. I

    Rifle Scopes Proper ring spacing?

    How far are rings supposed to be apart? If a rail has the little overhang part, how much should remain out? or can you mount the ring to the end of the rail without any problems? Any pics of places I can see proper spacing?
  7. I

    Factory Hunting/long range load

    Is there a general consensus for a Rem. 20" barrel 308 to be used for wt deer and long range?
  8. I

    Rifle Scopes TMR reticle help please

    Re: TMR reticle help please Thank you for chiming in. Would you recommend a 100 or 200 sight in? This rifle will also be used for hunting in TX.
  9. I

    Rifle Scopes TMR reticle help please

    Newbie, be gentle This is my first scope with turrets etc. I am not a reloader nor do I shoot long distances yet. The weapon is a 308 with a mk4 6.5x20. I will be shooting bullets in the 168 weight. All of Leupolds instructions are in chinese to me with the math equation' etc. Can anybody...
  10. I

    Gunsmithing Remington LVSF barrell

    Anybody know the dimension of this barrel? I want to replace the stock on mine.
  11. I

    Gunsmithing Length of pull

    Re: Length of pull Thanks yall im very close, once I put a shirt on i should be cool
  12. I

    Gunsmithing Length of pull

    How do you measure for length of pull? I just ordered a new stock from HS and it got here today. Is there a way to add to the stock if needed? I didn't order it from the factory because I needed it with the quickness.
  13. I

    Gunsmithing Rust inside the barrel?

    Re: Rust inside the barrel? not on the crown
  14. I

    Gunsmithing Rust inside the barrel?

    A friend of mine has a rifle, stock Rem. barrel in 270 wsm. If you look down the barrel about 1/8" down the barrel is some rust looking stuff, which I presume rust. It is on only two of the ridges of the rifling, the rust spots are about 1/8" - 1/4" at max, closer to 1/8. The rest of the barrel...
  15. I

    Rifle Scopes mk4 vs. ior

    Re: mk4 vs. ior IOR mp8 illuminated reticle 4.5x14,50 vs Mk4 6.5x20x50 illuminated tmr this will be an all round mid range set up. Like the higher magnification for looking at holes and horns. Both are around the same price
See more
Top Bottom
Back