jLorenzo
Featured content
2
Reaction score
420

Joined
Last seen

Latest activity Postings Featured content About Feedback Stats

    • jLorenzo
      jLorenzo reacted to tekmann2377's post in the thread AR-10 is chewing up my brass with Like Like.
      Use LC brass, and more moderate loads. The small improvement in consistency with good brass like Lapua/Alpha/etc is lost in the noise of...
    • jLorenzo
      jLorenzo reacted to FLIGHT762's post in the thread AR-10 is chewing up my brass with Like Like.
      The current FC GMM 308 brass with the blue primer sealant and nickel plated primer is harder brass than the 20+ Y/O GMM brass was. The...
    • jLorenzo
      jLorenzo replied to the thread AR-10 is chewing up my brass.
      Everyone is always saying Federal is soft, I have a bunch and have been liking it although so far I have also been running my loads too hot.
    • jLorenzo
      jLorenzo reacted to redneckbmxer24's post in the thread Leupold MARK 5HD 2-10x30 with Like Like.
      Yeah I'd say they fucked them up about equally.
    • jLorenzo
      jLorenzo replied to the thread 308 Winchester AR Only.
      I have some Lake City match brass as well as some new Starline small primer I am wanting to try. Also have some Sierra 169s, 155s of...
    • jLorenzo
      jLorenzo reacted to BCP's post in the thread 308 Winchester AR Only with Like Like.
      Lake city or federal brass and 41.5gr of H4895 is a great load for 168s/175s just fiddle with the seating depth For 155s try 42gr
    • jLorenzo
      jLorenzo reacted to tekmann2377's post in the thread 308 Winchester AR Only with Like Like.
      I have fired a ton of 155's of various flavors (150 FMJ-BT, Hornady 155 HPBT, and Sierra 155 SMK) with H4895. A charge in the 41.7-42 gr...
    • jLorenzo
      jLorenzo replied to the thread 223 Rem Bolt/Trainer Loads.
      I have not.
    • jLorenzo
      jLorenzo reacted to Ape_Factory's post in the thread 308 Winchester AR Only with Like Like.
      Latest load that really works out of my POF 16" Revolution gas gun. Sierra 169SMK's LC Brass, I sort by year now and these were '07's...
    • jLorenzo
      jLorenzo replied to the thread 308 Winchester AR Only.
      Anyone use H4895 or AR Comp with 155s and 168s? What is a good place to start with those components?
    • jLorenzo
      jLorenzo replied to the thread 6.5 Creedmoor.
      Yea seems a touch hot but may be lot dependent. I just did 42.8 of H4350 with 120 ELDs, 2913 out of Tikka 24" which are known to be slow...
    • jLorenzo
      jLorenzo reacted to Rob01's post in the thread 6.5 Creedmoor with Like Like.
      Here’s the original 120 AMAX load.
    • jLorenzo
      jLorenzo replied to the thread 308 Winchester AR Only.
      Weird that the velocity barely changed over that range of charges.
    • jLorenzo
      jLorenzo replied to the thread 6.5 Creedmoor.
      I would get into reloading. No doubt, if it is an option for you. You can always keep a lot of factory of known quality that has tested...
    • jLorenzo
      jLorenzo replied to the thread 6.5 Creedmoor.
      Anyone work with 120gr ELDs? I have H4350, Varget and Superformance
  • Loading…
  • Loading…
  • Loading…
  • Loading…