Recent content by justramit

Which way should I go with seating depth these are all .020 off lands

Was virgin brass just ran it through my neck sizer

Well I loaded up 10 at 72.6 and did 10 at 70.6 just for the hell of it. Shot both strings with 2 min in between shots and got the following. First shot at 72.6 was cold bore dunno if that would affect velocity that much. 72.6 1. 2952 2. 2982 3. 3000 4. 2998 5. 3007 6. 2976 7. 2994 8. 2991 9...

Sierra shows max of 71.1 @3.290. Mine are 3.390 OAL. That is .020 off lands

Yes is virgin brass and retumbo, will load up 10 at 72.6 and see what happens

I was kind of thinking about between 70.4 and 70.8 also maybe 70.4 had those two in one hole and am wondering if I pulled the third one. If I did that charge would be pretty close to 70.8

That is kind of what I was thinking I am pretty sure I pulled that last shot on 72.8 and that is why chrony errored too. Kind of thought about trying 72.6, 72.8, and 73 and see what happens.

I am trying to find a load for my 7mm remington Long range with 175 smk. Is new federal brass just ran through my neck sizer. I seated all loads .020 off of lands to start and went in .4 grain increments from 70 grains to 72.8. My chrony had some errors but this is what I got for each...

Re: 208 amax 2000mr 1000yd test Has anyone tried BL-(C)2 Hodgdon sight shows 2510 fps for 200 grain at only like 49,800 cup

Re: question about 208 amax in 20" barrel 308 Wonder if it has something to do with the amax bullet. I read where a guy was having same trouble with 162 amax in 7mm-08 and he loaded the new 162 bthp match with same data and the problem went away. My rifle is SPS tactical aac-sd with 1 in...

Re: question about 208 amax in 20" barrel 308 wondering if the new 200 berger hybrid would work better

Re: question about 208 amax in 20" barrel 308 Didn't realize he was a member on here but Chad at Dallas Reloads was the one I talked to. Found one of the guys that had the problem on here also.

Re: question about 208 amax in 20" barrel 308 Thought it sounded kinda odd, just thought I would ask. He said the other 3 rifles were fine. Just those two. Maybe twist was really 1 in 12. He said all 5 grouped very well, just those two past 800 had problems. Don't make much sense.

I was talking to a company that does custom reloading and asked about 308 and 208 amax combo. He said that he has worked this up in about 5 rifles. One rifle that was 22" barrel 1 in 10 (2580 fps) and the other 20" barrel 1 in 10 (2550 fps) that were very accurate til 800 yds. He said after...

Re: anyone have experience with 175 smk and 7mm-08 ? I was actually gonna try H4350 first. I have seen lots of people get 2700 with it also. My barrel is 26" but I am thinking about having it cut down to 20 or 22 so I will probably just get the best I can get with H4350 because I know it is...