Recent content by kennygss

  1. K

    Gunsmithing Winchester CRF action

    Chad is your guy, only you have to pay in pre-64 Winnys
  2. K

    Gunsmithing Building a Win 70 pre 64 rifle...

    I will recommend Chad at Longrifles with no hesitation. Here is a link to a M70 oldster he built for me. The rifle has exceeded every expectation. It is a hammer for sure. The workmanship is beyond top notch...
  3. K

    Gunsmithing L/H Stiller TAC 30 TITANIUM Bedding Block...

    That there is a cool deal.
  4. K

    Gunsmithing Word to the wise. . .

    Re: Word to the wise. . . You can always rely on remingtone to put out an average product. Warms the heart. You would thing HS would have a layup schedule. . . . .:)
  5. K

    Gunsmithing Ordered my 2nd Manners!!

    Re: Ordered my 2nd Manners!! Is Chad building the rifle? He will want to paint it for sure. I noticed the factory paint on my Manners SL was. . . .adequate' But, after fitting and bedding etc it will be scuffed up, might as well go full tilt!
  6. K

    Gunsmithing Longrifles Inc. a Big Thanks!

    Re: Longrifles Inc. a Big Thanks! No greater compliment for a Gum Maker IMO than to build a rifle that works, and is accurate. Congrats to the shooters.
  7. K

    Gunsmithing San Diego Ken's BAD ASS P64 Winny Build

    Re: San Diego Ken's BAD ASS P64 Winny Build <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">Phew, a 280? You got lucky you didn't screw up that badly "Magnum" on a rifle automatically puts an extra inch on your pecker...
  8. K

    Gunsmithing San Diego Ken's BAD ASS P64 Winny Build

    Re: San Diego Ken's BAD ASS P64 Winny Build <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">This is a beautiful rifle and a great build thread, thanks for documenting them like this Chad. The owner, Ken... I'll admit, I'm a...
  9. K

    Gunsmithing San Diego Ken's BAD ASS P64 Winny Build

    Re: San Diego Ken's BAD ASS P64 Winny Build I thought I would follow up a bit on this build. My original plan was to rebuild my old War Horse 41' Winny on the "cheap" if there is any such thing. I thought I might have it re-barreled and put it in a B&C because they were the only ones with an...
  10. K

    Gunsmithing San Diego Ken's BAD ASS P64 Winny Build

    Re: San Diego Ken's BAD ASS P64 Winny Build Looks very nice. Its good to have the pics, since its not going to look that good for very long! Thanks Brother, I appreciate your help bringing my old War Horse back to life again.
  11. K

    Gunsmithing Winchester 70 Pre 64

    Re: Winchester 70 Pre 64 That 8X Unertl will be the tough part. I always heard it was just a heavy profile factory 06'
  12. K

    Gunsmithing San Diego Ken's BAD ASS P64 Winny Build

    Re: San Diego Ken's BAD ASS P64 Winny Build Killing me Chad!
  13. K

    Gunsmithing Excessive AR Headspace

    Re: Excessive AR Headspace Does the used barrel have a: 223, 5.56 or Wylde chamber? A 5.56 Chamber is sloppy, with a longer throat (usually .226 diameter x .056 long) .223 has a .025 throat, Wylde has a .224 diameter throat with .o61 of freebore. There are other chambers as well, who made the...
  14. K

    Gunsmithing C.D. 7mm/300WM Medium Hunter

    Re: C.D. 7mm/300WM Medium Hunter Wow, thats a nice deal, rockin' caliber as well. Nice job.
  15. K

    Gunsmithing 742 wont eject

    Re: 742 wont eject Also, if it has the "chatter marks" in the receiver, its on its way out.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts