Recent content by MikeEzell

  1. M

    To tune or not. A follow up on Tuning .

    As with many things in life, people tend to believe what they want to be the truth. It doesn't change anything except their own perception of reality.
  2. M

    Tuner series: Harris tuner part 2

    Here's a detailed print for installation. Note there is a .900x .500 long journal behind the threads. It's also very specific as to thread spec. Lots of smiths thread to fit the part in hand. No way to guarantee fitment unless the bbl was threaded to a class 2 dimension but it often will. Just...
  3. M

    Tuner series: Harris tuner part 2

    Thanks for all you're doing Bryan! Let me know when/if you'd like to test with my tuner. I'd happily donate one to your testing. I didn't want to at first because I didn't want it to be perceived as influencing your test in any way. But, seems like your tests have already shown that tuners do in...
  4. M

    Remington 700... Bolt Question

    Oh, it can be done but it'd be throwing a lot of good money after bad. Cocking cam, ejector, extractor, bolt handle and anti bind groove, if needed. Am I forgetting anything?
  5. M

    Remington 700... Bolt Question

    Well...that may be true. ;)
  6. M

    Remington 700... Bolt Question

    You can buy a PTG cheaper, quite a bit.
  7. M

    Harrell Tuner on a Vudoo MTU tapered barrel

    Shawn, while I totally know better than to fuel your desire to call me out without you having any idea how much testing we've actually done on my design, well... Above, you mentioned seeing a picture of my tuners before completion and you added that it appears that they might have whatever...
  8. M

    Harrell Tuner on a Vudoo MTU tapered barrel

    Shawn, I got your email, in the wee hours of the morning a couple of days ago.. asking for a quick reply., so here it is. I've openly discussed tuners on most every site without hiding much. You can find pertinent info with a quick search. Your email was, lets say, direct. I don't recall you...
  9. M

    Vudoo V-22S Single Shot Bench Rest Action

    Oh, no worries and I'm not offended. That said, I have zero recollection of speaking with a gunsmith recently, that informed me that he was inquiring for export purposes or that he was calling on your behalf, due to any language barriers, which is certainly possible. There was one that called...
  10. M

    Vudoo V-22S Single Shot Bench Rest Action

    I don't check in here that often but many of the comments make me feel very proud of the products mentioned here that I'm involved with and the support that I make an earnest effort in giving to everyone that I speak with, especially regarding tuners. Unfortunately, and apparently, I have not...
  11. M

    PDT Partical Dampened Tuner - Range Report

    Amen! The cf tuners thread on. More recoil means it's simply harder to hold the tuner. The last thing anyone needs is for the tuner to slip. I could make one for you just like the one you have, that will clamp on, but it may slip. Another thing, the current cf tuners are made for big barrels...
  12. M

    Gunsmithing Stiller bolt nose recess?

    Bolt to tenon clearances serve some less than obvious purposes. Metering of expelled gas and debris as well as extractor containment, in the event of case rupture are a couple. Also related to this is the ability of the bolt nose to expand to fit the counterbore in extreme overpressure...
  13. M

    PDT Partical Dampened Tuner - Range Report

    I just found this while googling my own tuner. Boy, it's good info, and just what I like to hear from customers. I appreciate the good report and how you are going about testing with it. Being methodical is the key. All too often, people tend to move tuners randomly, hoping for improvement...
  14. M

    Gunsmithing Machining a nitrided part

    Here ya go. shars.com - 02840 Solid Carbide Chucking Reamer
  15. M

    Neck diameter question

    Can you slip a bullet into a fired case....An inch is "almost" as good as a mile here. Too much clearance is simply working the brass more.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts