Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Re: bottom metal that accepts DPMS AR10 mags? there isn't anything that is readily available but anything is possible my Savage has been modded to take M1A mags and the bolt needed to be modded to work
Re: Hornady thrower on Dillon well, I had an RCBS powder measure which is similar in design (I can't remember what those types are called) but I think I had better luck with the Dillon measure when using stick powders (RL15)
Re: 22-250 Do I crimp I crimp all my rifle loads and have had good success by crimping. I use the Lee Factory Crimp die and noticed that my groups had tightened up after crimping. All factory ammo is crimped, so why not do it?
Re: .308 bullet for 20" Barrell 1-10 twist I used a 190gr Sierra MatchKing from my 19" and now from my 21". Very good results out to 1K. I hadn't tried H380 but have used both IMR4064 and RL15 with good results. The other bullet that I've shot with great results inside of 400yds is 165gr...
Re: Come SEE NEW SHARK SUPPRESSORS IN OHIO I remember hearing his can, last year, at the SH Cup and it was a nice sound compared to the other cans that were present.
Re: Buying a AAC 762sd as my multi caliber silencer I think you'll be fine. The AAC can has larger bore than most .30 cal cans (I read a comparison, somewhere).