Recent content by SilentMike

  1. S

    Suppressors Ti-rant 45 and Sig Tacops

    Re: Ti-rant 45 and Sig Tacops The standard .578-28 piston is designed with extra length to provide recoil spring guide rod clearance on hosts with a full length guide rod like the Sig 220. If the Tac-Ops has a full length guide rod, order the .578-28 standard. If it has a GI style recoil...
  2. S

    Suppressors How do I know what thread pattern is on my AI AWSM

    Re: How do I know what thread pattern is on my AI AWSM All I've encountered have been M18 x 1.5. The muzzle profile is somewhat unusual, in that it has a relatively short section of thread with a tightly dimensioned section of barrel behind the threads for suppressor alignment.
  3. S

    Suppressors melonite a suppressor

    Re: melonite a suppressor <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mnshortdraw</div><div class="ubbcode-body">I think this one will get the cerakote treatment. My next can will be TI for sure both for weight and for it's anti rust properties. Thanks for...
  4. S

    Suppressors AAC 762-SDN-6 End-all, Be-all Can??

    Re: AAC 762-SDN-6 End-all, Be-all Can?? Jake, You might consider the full sized 762-SD. It's a little over an inch longer than the N6, but it weighs the same and will give you better reduction on the bolt gun. The N6 is optimized for the pressures of 12.5-14.5" 7.62's, so it's performance on...
  5. S

    Suppressors melonite a suppressor

    Re: melonite a suppressor An all-stainless or all-Ti silencer should offer enough corrosion resistance for 99.9% of applications. Our greatest interest in the nitriding was that it provided a dull, dark grey finish that would not burn off like paint. Another issue to consider is that...
  6. S

    Suppressors melonite a suppressor

    Re: melonite a suppressor We tried a few nitriding processes like melonite a few years ago. With a sealed/non take apart suppressor, the problem you encounter is the inability to completely flush the salts from the interior. The silencer will come out looking great. A week later, the salts...
  7. S

    BDC Retcle for .22 LR

    Re: BDC Retcle for .22 LR Even though this system is calibrated for high velocity loads, I wonder if you could get this to work with subsonic for suppressed use.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts