• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by Truno223

  1. T

    Looking for a good welding machine.

    Re: Looking for a good welding machine. Both Lincoln and Miller are good names. I own a Millermatic 252 and could not be happier with it. If you go MIG my only suggestion is to get a larger machine then you think you will need. ARC is nice for less prep and cheaper setup cost, but for a...
  2. T

    DIY steel targets . . . continued

    Re: DIY steel targets . . . continued I just whipped up two of these to try out this weekend. They're 2 foot tall by 18 across. I used 3/4 inch black pipe, the top bar is welded at the 90s whereas the verticals are lathered in anti-seize for easy removal. The chain is mounted to a piece...
  3. T

    recomendations on case prep machine?

    Re: recomendations on case prep machine? I've had good luck trimming with an RCBS and an electric drill. Primer pockets and chamfer/debur are handled on two drill presses. I processed about 150 cases in a little over an hour using these methods this past week. I just chuck a Lee...
  4. T

    Rifle Scopes Scope situation.

    Re: Scope situation. I would get some better glass for the rifle. I have a cheapo Mueller Eraticator that I got from JoeBob's for about 200 bucks. My rifle is a 93R17BVSS that has the barrel cut to 16.5in with a target crown. I shot this group at 100 with the stock old style trigger, the...
  5. T

    Gunsmithing will this get around the atf rules legally ?

    Re: will this get around the atf rules legally ? Just curious, how long has the FFL to <21 receiver law been around?
See more
Top Bottom
Back