• 1 WEEK LEFT: This Target Haunts Me Contest

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Recent content by wkarma

  1. W

    Printed Precision Trickler

    I don't know, but one of the other testers has samples in hand.
  2. W

    Printed Precision Trickler

    The PP Doctor keeps his website pretty up to date with status info. I believe he's still waiting for the next batch of control boards to be delivered. He says he's been through all the recent email traffic so if you still haven't gotten a response you might try reaching out again.
  3. W

    Printed Precision Trickler

    Once you get the technique it's not too bad, but yes it's the main spot that everyone has mentioned needs some refinement. Dramworx has a replacement tube coming out for the PP that has a shutoff valve, if you want to go gucci some. I use a big 3dprinted catch box/funnel combo that makes...
  4. W

    Printed Precision Trickler

    I use it with Retumbo and 8133 frequently. You have to change the disc to the larger "Retubbo" disc, but that's it. That video was on original prototype hardware and first release software. Since then Dr PP has updated some of the bulk thrower geometry and software logic to work better with...
  5. W

    Printed Precision Trickler

    Pretty sure Dr PP is out of town at the moment. I'm sure he'll get to you as soon as he can, but it is a one man operation.
  6. W

    Printed Precision Trickler

    I use https://www.amazon.com/dp/B07RB2WBKS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 with the attached STL in the zip file. It works great and pours nicely. No problems with bounce outs and fits the base perfectly.
  7. W

    Printed Precision Trickler

    The easiest way to know if you got a good calibration is to look at the reported per-kernel weight and make sure it's reasonable. varget/h4350 should be in the .02-.03 range. If it's lower than that you prob have too much in the trickler and are getting double drops. If it's higher, you might be...
  8. W

    Printed Precision Trickler

    New update from King PP, for those wondering about order status.
  9. W

    Printed Precision Trickler

    First off if you hear that grinding sound on the bulk, you need to empty the hopper, pull the disc out and give everything a good blowing out :)D). That sound means something is getting jammed up somewhere and it will throw off the cal. Also I think you have too much in the trickler. If the...
  10. W

    Printed Precision Trickler

    Talking to Mr PP, it may have just been some static that builds up in the bubble wrap during shipping. Running powder through it can help with this, but you can always give all the parts a good rub down with a dryer sheet. They are treated with a graphite spray and all have powder run through...
  11. W

    Printed Precision Trickler

    What was 8208 doing? Not sure many of us tested it since it's not all that common anymore. Powder database shows it's average diameter is less than varget, so it should work ok in the varget disc. The testers have found that taking a slow mo video of the trickler while running can be helpful to...
  12. W

    Printed Precision Trickler

    It's all on the webpage.
  13. W

    Printed Precision Trickler

    Hmmmmm https://printedprecision.com
  14. W

    Printed Precision Trickler

    Only fx120 and equivalents so far.
  15. W

    Printed Precision Trickler

    There's about 15-18 out in the wild for testing. I think Mr. PP is doing a final set of tweaks to a couple of the parts, but it's coming along nicely.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts