Fuckin baddass! how bout a picture of all of those trophies won with that ES atx?
The bolt lift on my AXSR is somewhere between my ‘15 AX308 and my AT-X. But thats the same order of use they have as well. So might be just breaking in.
Seems like an overblown issue that you would only realize if you had time to play with them side by side.
Seems like an overblown issue that you would only realize if you had time to play with them side by side.
The rear skin has to be cut to fit the monopod. My understanding, that is what AI did.Gave up on finding old skins for the AWSM. I have AW skins but cant mount the rear one of them due to the monopod ffs. She will get a classic rattle can finish within the next few days to reduce resale value that much i will never even consider selling her
View attachment 8334587View attachment 8334588
And you were running that horrible angled factory grip….
Were there different skins for AW and AWSM? would be an absolute mess if i cut that skin and it does not fit afterwards. Any experience here guys?
*7 axis dreml noise*
There is a slight difference in the the skins but can be made to work. 7th Axis will make quick work of it though.
First off, it’s Elite Moss…it was originally that gawd awful democrat blue that AI made. Our team was a couple points away from a Key / Trophy at Guardian Arena. We came in 5th.
Yes, specific front skins due to magwell size. The back are identical
The front, yes, due to magwell differences. The rear skins are identical between long or short actions.
Nice collection man! Congrats! AI represent! It’s like the “Predator” collecting his trophy heads. Thanks for the picture..
I'm not sure how you even finished without the quick adjust thumbscrews on the buttstock??
Bolt lift United;
Mr. Bennett,
You’re snide remark in the midst of your “success”is nothing more than verbal flatulence. Once again, cease and desist from the weak posturing, it’s quite embarrassing for those who truly know… bolt lift.
Dewey, Cheatem, and Howe
Law Firm
I was watching a 2024 Shot show interview with Scott from Accuracy International North America on firearmsguide youtube channel. It was about the AX ELR. He said the 375/408 Cheytac bolts and magazine you could get from them in 2024. I was curious if they decided not to make and offer those 2 barrels?
I asked this question on the youtube video as well.
The video title is: Accuracy Int. AX ELR .50 BMG Anti Material Rifle- SHOT Show 2024.
It's only 3 minutes and 29 seconds, for anyone you wants to see if I missed something.
I asked this question on the youtube video as well.
The video title is: Accuracy Int. AX ELR .50 BMG Anti Material Rifle- SHOT Show 2024.
It's only 3 minutes and 29 seconds, for anyone you wants to see if I missed something.
I think it is to boost LE sales
They all have no self esteem and need to feel special and better.
Diversity is a good thing they both have their place
Gotta be careful they multiply too though. Gotta have them all
What is the consideration holding you back?
300nm performs better but the 300wm is the correct caliber for a mk13. With a return kit I really should keep it "correct".
Just sell it to cloners and get something more functional with the funds.
I am a cloner. That's my greatest problem.
Seriously though I don't have a range or know farmers to stretch past 1k anyway. I'd rather have the history piece than a normal magnum cal gun I shot a few times a year.
The only non clone rifles I own are my AI and and a little 300blk AR.
I like to think of them as little investments. In 5 years I just quadrupled my money on one piece. Sako trg and paying off my truck lol.
Two different considerations, then, which are mutually exclusive. Seems your decision going forward is clear.
Got a little more barrel break-in accomplished today. Still shooting factory ammo until I get 100 rounds through it. This is Eagle Eye Precision 105gr Hybrids.
10 shots at 655, ended up into 4-5/8". 27" Krieger in 6GT.
10 shots at 655, ended up into 4-5/8". 27" Krieger in 6GT.
How does Eagle Eye perform? Their cartridges are pricey
Hoptic USA https://www.hopticusa.com/product-page/july-4th-saddle-blankets I have them on several rifles and like them a lot, but on higher recoiling rifles the raised pattern has a cheese grater effect on my baby face.
Thanks!
I am joining the AT club soon.
Which scope rail do you run -- high or low?
Why?
There is no night vision usage in my future.
Thank you in advance for the advice.
-Stan
Which scope rail do you run -- high or low?
Why?
There is no night vision usage in my future.
Thank you in advance for the advice.
-Stan
Thank you.
Do both rails have the same number of lugs that interface with the receiver?
It looks like the high rail here has two lugs:
Accuracy International - AT Action Rail Assembly 20 MOA High - 26612
Higher profile to line up with Night Vison Bracket. AI Part No. 26612
www.sportingservices.co.uk It looks like the low rail here has one lug:
Low Picatinny Rail for the Accuracy International AT Rifle
Aluminium, black hard anodised, “0” MOA. Includes stainless steel allen head mounting screws and rear recoil stop.
www.sportingservices.co.uk -Stan
Someone else can chime in cause I’m not going to pull mine off to check it. I’m betting the parallel lug in the center is removable or in the gun itself. Both bases have the spot for it in your pic.Thank you.
Do both rails have the same number of lugs that interface with the receiver?
It looks like the high rail here has two lugs:
Accuracy International - AT Action Rail Assembly 20 MOA High - 26612
Higher profile to line up with Night Vison Bracket. AI Part No. 26612
It looks like the low rail here has one lug:
Low Picatinny Rail for the Accuracy International AT Rifle
Aluminium, black hard anodised, “0” MOA. Includes stainless steel allen head mounting screws and rear recoil stop.
-Stan
I removed the one on my AXMC years ago but I don’t recall if that lug was permanent or removable. I want to say it comes out and the “pin” style one is fixed in the scope rail
Again been a while since I messed with one off the gun
I’ll add it does state on the low one to use oblong existing scope recoil lug in the description. The high doesn’t state thisThank you.
Do both rails have the same number of lugs that interface with the receiver?
It looks like the high rail here has two lugs:
Accuracy International - AT Action Rail Assembly 20 MOA High - 26612
Higher profile to line up with Night Vison Bracket. AI Part No. 26612
It looks like the low rail here has one lug:
Low Picatinny Rail for the Accuracy International AT Rifle
Aluminium, black hard anodised, “0” MOA. Includes stainless steel allen head mounting screws and rear recoil stop.
-Stan
Which leaves me to assume the high one may be higher or something. So it comes with its own lug for that spot….
Honestly, it has been good (and frigging expensive). It shot my first break-in groups into 4+1, so I just messed with seating depth a touch and .005 further in everything came together.
This is my second go-round at 655 and these results mirrored the first attempt.
When these are gone this barrel will never see a factory loaded round again
. Most are running the Pic rail, I believe most of the recent production rifles came with them.
Wtf would you even want dovetail is this 1996?
