NEW! MDT SEND IT GEN2 \\ Electronic Rifle Level

MDT_OFFICIAL · May 2, 2025

The MDT SEND IT GEN2 is a compact, rugged electronic level for precision shooters. It gives instant LED feedback—no bubbles, no guessing. When it’s green, send it. https://mdttac.com/us/send-it-gen2-level

oldrifleman · May 2, 2025

These do not appear to be compatible with the existing mount solutions.

Habu34 · May 2, 2025

Post to be deleted…

lash · May 2, 2025

Habu34 said:
Hello from France
Can you give all three dimensions with and without mount in order to know which model will fit.
Do you mean depth is 31.3 mm ?
On the following picture, the 16 mm height seems incorrect, it should be around 19 mm.
Or maybe 16 mm is the height above the inside of the picatinny rail…
Thanks

View attachment 8677809

Why do you ask that? In the very picture you included, it shows the thickness of the led unit as 12.7mm. Is it a stretch to imagine that 3.3mm is added using that particular picatinny mount?

Maybe this picture from their site can help:

Edit: that’s a CR2032 battery in the picture for size comparison.

Or go directly to to the page where they are for sale:

https://mdttac.com/us/send-it-gen2-level

Habu34 · May 2, 2025

Based on the picture scale…, the 16mm measure should be placed differently…

Jcarpenter223 · May 2, 2025

MDT_OFFICIAL said:
The MDT SEND IT GEN2 is a compact, rugged electronic level for precision shooters. It gives instant LED feedback—no bubbles, no guessing. When it’s green, send it. https://mdttac.com/us/send-it-gen2-level

View attachment 8677806

Snagged one. Been looking forward to it since seeing vids from Shot

lash · May 2, 2025

Habu34 said:
View attachment 8677825
Based on the picture…

Yes. From the same picture:

Now, if your concern is where you perceive that line to be, I can’t help you. These pictures are the exact ones I took from your post. Thus, my question.

lash · May 2, 2025

Habu34 said:
View attachment 8677825
Based on the picture…

I can’t help but see where you did a poor edit to try and make your point. Why can you not believe the picture as shown in your original post?

MDT_OFFICIAL · May 5, 2025

oldrifleman said:
These do not appear to be compatible with the existing mount solutions.

They will not be. Due to the smaller overall size, it will not be compatible

-Paige

Jcarpenter223 · May 8, 2025

Got it today and mounted up, once a vertical attachment hits the market I’ll run the ocular

TheOE800 · May 11, 2025

@flyer1a y'all gonna make a mount or would one be better off getting the pic version to run on the match pic rail?

oldrifleman · May 11, 2025

I don’t have any pic rail space available so I just bought 2 more of the gen1 so I can use my existing mounts.

flyer1a · May 12, 2025

TheOE800 said:
@flyer1a y'all gonna make a mount or would one be better off getting the pic version to run on the match pic rail?

We are, but it will not be immediate. MDT is supposed to be sending out a tech pack for people like us any time, once we have that we will begin to produce very quickly.

I think in the near future you'll see new mounts from us for the SendIt Gen2, the SG Pulse, and the SG Pulse Pro.

ShewderReddy · Friday at 9:06 PM

If you're looking to replace the fiber optic line in your Send-It Gen2 Ocular Mount Kit, be aware there's a typo in the manual. It incorrectly lists the fiber as 0.86" x 48", when it should actually read:

0.086" x 48" (2.2mm outer diameter PMMA fiber with a 1mm core and 1.2mm jacket).

These specs will help you find compatible replacement fiber optics if needed.

For those wondering about whether your optic tube and ring height allow center-mounting the Send-It Gen2, here's my experience:

I used Badger Ordnance “high” height rings (1.0”) instead of their “standard” (0.823”) rings.
Optic used: Swampfox Kentucky Long 30mm 4–24x50
This setup provides adequate clearance between the optic and the Send-It Gen2, allowing center alignment under the tube without interference.

Slark · Sunday at 6:48 PM

Is there a built in way to mount this vertically as shown on the website?

oldrifleman · Sunday at 7:00 PM

Slark said:
Is there a built in way to mount this vertically as shown on the website? View attachment 8689465

Simple answer, not yet.

Jcarpenter223 · Sunday at 7:01 PM

Slark said:
Is there a built in way to mount this vertically as shown on the website? View attachment 8689465

Looking at mine I figure they’ll release a v-mount option

ShewderReddy · 2025-05-19T17:11:03-0400

Jcarpenter223 said:
Looking at mine I figure they’ll release a v-mount option

When I ordered mine, there was already a "v-mount" option available in the drop-down.

Baron23 · 2025-05-19T17:50:53-0400

Slark said:
Is there a built in way to mount this vertically as shown on the website? View attachment 8689465

Ah, where’s your parallax knob? lol

lash · 2025-05-19T17:52:18-0400

ShewderReddy said:
When I ordered mine, there was already a "v-mount" option available in the drop-down.

I haven’t looked back yet. Are they offering to sell the mounts separately? As in addition to?

Jcarpenter223 · 2025-05-19T18:52:35-0400

ShewderReddy said:
When I ordered mine, there was already a "v-mount" option available in the drop-down.

Yes that’s what I ordered. Saw an ad or video either on fb or ig stating the mount will be for sale soon

LA260 · 2025-05-19T19:43:57-0400

I'm waiting for mine to come (center mount version). If it doesn't work with my setup mounting it under the scope I don't see why any of the 90deg offset mounts available would not allow side mounting it, unless I'm missing something...

TheOE800 · 2025-05-19T20:02:03-0400

LA260 said:
I'm waiting for mine to come (center mount version). If it doesn't work with my setup mounting it under the scope I don't see why any of the 90deg offset mounts available would not allow side mounting it, unless I'm missing something...

Different footprint from Gen 1.

LA260 · 2025-05-19T20:35:15-0400

TheOE800 said:
Different footprint from Gen 1.

I mean just any old 90 degree pic mount should work with the direct mount Gen 2 level. For example this

https://monstrumtactical.com/90-degree-offset-picatinny-rail-mount/

Jcarpenter223 · 2025-05-19T20:48:09-0400

LA260 said:
I mean just any old 90 degree pic mount should work with the direct mount Gen 2 level. For example this

https://monstrumtactical.com/90-degree-offset-picatinny-rail-mount/

That’d work

TheOE800 · 2025-05-19T21:47:38-0400

LA260 said:
I mean just any old 90 degree pic mount should work with the direct mount Gen 2 level. For example this

https://monstrumtactical.com/90-degree-offset-picatinny-rail-mount/

Yes, I’m going to try the A419 side pic mount for the picatinny level version until the v mount options come out. Then I’ll transfer the pic level to an AR.

ShewderReddy · 2025-05-20T16:32:19-0400

lash said:
I haven’t looked back yet. Are they offering to sell the mounts separately? As in addition to?

I'm not sure, I would have bought both if it I saw it available though.

lash · 2025-05-20T18:01:44-0400

ShewderReddy said:
I'm not sure, I would have bought both if it I saw it available though.

Probably not. The aftermarket will likely fill in the gaps for a while.

Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

NEW! MDT SEND IT GEN2 \\ Electronic Rifle Level

Official Account of Modular Driven Technologies

Sergeant

Private

Swamp Rat

Private

Gunny Sergeant

Swamp Rat

Swamp Rat

Official Account of Modular Driven Technologies

Gunny Sergeant

Argumentative

Sergeant

Craig, Area 419

Private

Attachments

Private

Sergeant

Gunny Sergeant

Private

Check 6

Swamp Rat

Gunny Sergeant

Private

Argumentative

Private

Gunny Sergeant

Argumentative

Private

Swamp Rat

Similar threads