NEW! MDT SEND IT GEN2 \\ Electronic Rifle Level

[MDT_OFFICIAL]

The MDT SEND IT GEN2 is a compact, rugged electronic level for precision shooters. It gives instant LED feedback—no bubbles, no guessing. When it’s green, send it. https://mdttac.com/us/send-it-gen2-level

 

[oldrifleman]

These do not appear to be compatible with the existing mount solutions.

 

[Habu34]

Post to be deleted…

 

[lash]

Hello from France
Can you give all three dimensions with and without mount in order to know which model will fit.
Do you mean depth is 31.3 mm ?
On the following picture, the 16 mm height seems incorrect, it should be around 19 mm.
Or maybe 16 mm is the height above the inside of the picatinny rail…
Thanks

View attachment 8677809

Why do you ask that? In the very picture you included, it shows the thickness of the led unit as 12.7mm. Is it a stretch to imagine that 3.3mm is added using that particular picatinny mount?

Maybe this picture from their site can help:

Edit: that’s a CR2032 battery in the picture for size comparison.

Or go directly to to the page where they are for sale:

https://mdttac.com/us/send-it-gen2-level

 

[Habu34]

Based on the picture scale…, the 16mm measure should be placed differently…

 

[Jcarpenter223]

The MDT SEND IT GEN2 is a compact, rugged electronic level for precision shooters. It gives instant LED feedback—no bubbles, no guessing. When it’s green, send it. https://mdttac.com/us/send-it-gen2-level

View attachment 8677806

Snagged one. Been looking forward to it since seeing vids from Shot

 

[lash]

View attachment 8677825
Based on the picture…

Yes. From the same picture:

Now, if your concern is where you perceive that line to be, I can’t help you. These pictures are the exact ones I took from your post. Thus, my question.

 

[lash]

View attachment 8677825
Based on the picture…

I can’t help but see where you did a poor edit to try and make your point. Why can you not believe the picture as shown in your original post?