My friend has a build with a Noveske 12.5 barrel. This is the AB numbers I ran off his velocity of 2369 fps with eld-m’s.
Geissele GFR Maritime Reconnaissance 6mm arc write up and review
- Thread starter JohnDeereGuy1996
- Start date
For comparison to a 12.5in 6arc, here is my SR-15 14.5in with Black Hills 77gr OTM at 2607fps.
Great info! I should have said out to 500y (about as far as I want to shoot a 556). Certainly better long range performance with the ARC, but I don't love the 1 MIL of drop from 800 to 850.
I will say that the idea behind my 14.7" is to compromise somewhere between the 11.5" and 18" which I think it will do well (and the 14.7" is probably what I'll end up keeping if I can get the lighter bullets to a speed to help me hold coyote fur to 300y)
I will say that the idea behind my 14.7" is to compromise somewhere between the 11.5" and 18" which I think it will do well (and the 14.7" is probably what I'll end up keeping if I can get the lighter bullets to a speed to help me hold coyote fur to 300y)
The plan is to put a ZCO 420 on the 20 inch stratomatch and ZCO 210 on 14.5, but that’ll take a bit to save up cause I decided to venture into the custom 2011 game 
. In the meantime I’ll vulture optics off my ar10s.
. In the meantime I’ll vulture optics off my ar10s.
finally got the gfr scoped properly to a more fitting optic and got it zeroed. Rifle hadn’t been shot since doing this review. Added the hux 6k as well and shot two 5 shot groups back to back. These weren’t cherry picked and were the only two I shot. Used 108 grn eld match. Maybe it’s just me but for a chrome lined barrel that’s pretty damn good to me.
Impressive rifle. I will eventually try one of these out in 16 inch form if they continue to have good feedback. The main thing I am concerned about is the bolt life over the long run. @JohnDeereGuy1996 thanks for the info. How many rounds do you have on it now?
I’m only a little over 100 or so. Haven’t got to shoot much lately unfortunately.
Also these new rifles come with no magazine and the geissele mags are unobtanium now. So I have a 3k rifle with no magazine. Real nice geissele.
These work in the Geissele rifle just fine if you are okay with the looks.
If a maritime reconnaissance is successful no shots are fired, so no magazine = no big deal.
-Stan
These (and 15rds) were briefly in stock yesterday at almost reasonable prices.
Geissele ICM 20rd Stainless Steel Blk Magazine 05-3232 For Sale - EuroOptic
Geissele ICM 20rd Stainless Steel Blk Magazine 05-3232 For Sale
The barrel extension is longer, so proprietary upper and barrel. Unsure on the bolt. Geissele has mentioned the barrel extension previously as to the reason they won’t sell individual barrels in 6arc.
Pick my 18” up on Tuesday. Will give a report once I have it in hand, also went ahead and got the 6k can for it too. Will be mounting a ZCO 4-20 on it. Sure hope it comes with a damn mag!!!
I am not sure it makes much difference but rather than a 6mm, I just bought the 30 cal version.
Not one bit. I already had 6 .30cal cans, so I figured why not get a 6mm can to dedicate to it? I'm very happy with the can, but I wouldn't be opposed to the CAT Noah either.
Filed form 4 on Friday and got approval today. Scope mount showed up as well. Picked up a couple boxes of hornady 108eldm,103 eldx and the 80gr. Will have a range report soon as I get time to shoot. Hoping one of these 3 will shoot good as I wasn’t planning on reloading for it.
Bolts interchange in standard AR-15s. Not sure about reverse compatibility with other bolts but I also don't think you'd want to do that other than in a pinch. The G bolts have been among the best I've tested for durability/longevity.
Had good luck with the 6.5 Outfitters (Rexus now I think) and Maxim bolts. JP we broke a couple of extractors but the lugs held up fine.
I smashed and peened and broke several no-name budget bolts, which during the covid shortage was the reason for all of the follow-on testing because I got a little worried that it was a Grendel/ARC-wide problem. At the time, I was searching for anything I could get and in the deep dark corners of the internet that's what I was able to find. It turns out it was most likely a material/processing issue. Especially on a F/A lower for whatever reason cheap soft bolts would set-back. One set back .019" and peened out so wide on the lugs it wouldn't fit into the extension anymore. This happened across a string of full auto fire and the rate of fire continually dropped until it jammed as the lugs created a friction fit with the extension.
The ones I mentioned above made it through 500-700 rounds of F/A fire without any measurable setback. The Geissele bolts we have thousands of rounds on close to 10 of those bolts now, and eventually broke one after about 7000 rounds total, 800 of those were F/A 58,000-60,000psi loads (NOT a suggestion for anyone else to try it).
With the Geissele mags being unobtanium/stupid expensive and the rifles not coming with them anymore, I have a spare 5 round (I think, its the shortest one) that I wont be using that I'm happy to give to someone if they need one for their rifle.
Rooftop defense. He generally doesn’t charge tax either depending on what state you’re in. If you are military it’s also a 10% discount. I love the ambi lower so far. It’s pretty cool to release the bolt you push down on the dust cover. He had 14.5 and 16” still in stock yesterday.
Rooftop seems to have a lot of hard to find items in stock without all the bs of having to wait weeks and weeks for it like optics planet. I think I got a vltor MUR upper from them when no one else had them and it shipped right away.
I agree. Anytime he has something in stock I’m looking for i use him. This time around he was the first to get the ambi gfr. He always ships same day as well unless it’s after 5. Usaully always lets you use random coupon codes you can find as well. Good people over there for sure.
Sol at rooftop is as good as they come. Honest fellow Arkansan.
Similar threads
