Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Try Thunder Ammo, Randy Powell has some 740 & 770 grain solids that mine likes. I think he uses RL50 for most of his ammo.I wont be posting my M82a1 groups against those, thats for sure.
Only 2moa claimed by the manufacturer, I have a couple of loads that get closer to 1.5" @100yds but overall its not a gun for accuracy.
Ive tried 3x types of primers, 5x types of powder, 4x types of brass, and way too many projectiles from m33 ball to 800gr Solids.
I heard something about stuff coming loose on the TAC-50 pre-Cadex chassis. Leaning towards the Tremor - Bartlein, DLC bolt and several inches shorter than HTI when folded(42.4 vs 45.75") with similar weight at 22.3 vs 20 lbs(seemingly softer recoil). If I get my hands on one, I'll post some groups once dialed in.I had a TAC-50
Too long, recoil is a bitch and shit would rattle loose all the time (the stock, the bolt release, the action screws). That was before CADEX but now the price is insane too
Pass
I use the Terminator T6 on my 50.....but I also shoot with blast Shields..@wooferocau Just got an HTI 50, what bipod do u have? I have shot an AI 50 off a tripod, the back leg was fully extended and you could shoot in the prone position. It hardly kicked at all as the back leg extended took the brunt of the recoil, it had a brake, but I am not sure what kind. Going to try to find pics. Actually shot a setup done by Bryan Morgan, the 2014 PRS champ.. was on a Cabelas Experience with Nightforce in 2018. You can find video of my wife shooting the AX50 on youtube under user sorleski .. you might be able to see the leg of the tripod extended backwards.. I also got a T6, having a gunsmith fit to barrel and then drill some ports in the top. Will post pics when all done.
Ok wow on the Bipod, that's neat.. and looks very sturdy. I noticed some pics you posted earlier where you didn't use a blast shield. Is the blast that bad even with the T6 on it? Given the shortness of the rifle, it is definitely a concern. I am actually wondering of a gunsmith could well on little blast shields right onto the back of the muzzle brake once he has it fitted properly, maybe a 1-1.5 inch flange that would/could be welded onto the back of the T6. Not sure how much of a difference it would make. I have also thought of creating some blast plates that would attach where you have your weights attached to your rifle, the plates would act as weight and blast shield and would fold forward for carrying/transport.I use the Terminator T6 on my 50.....but I also shoot with blast Shields..
Had an old friend out yesterday actually to shoot the 50....
For as long as it have known him I have always regarded him as a fabulous marksman.....
He still is...
1 Mile ...plate is 16"...
BTW.....he loved the HTI...
In Aus that's a big ask unfortunately!find an AR50 brake or a K&P clam shell style brake
Without blast shields the T6 does a very good job of mitigating recoil ...the back blast is not terrible, but it is still quite substantial.I noticed some pics you posted earlier where you didn't use a blast shield. Is the blast that bad even with the T6 on it?