Search results

Search the forum Search Articles
  1. P

    300 NM and 245gr

    Hello, I have been using N570 with the 245gr Bergers and getting 3020-3030ft/sec with about 84.6-85 grains. I am however finding the N570 is quite velocity sensitive with temperature. I recently purchased a bottle of N565 and was wondering current load developments others have tried. I am...
  2. P

    F T/R Competition FTR build suggestions

    Hey guys I need some insight regarding my build. My list includes: Eliseo R1 80oz Long action 29.5oz pierce action Bipod 28oz Barrel is 104oz for 30" heavy palma Scope is 28oz nightforce competition Rings 4oz Jewel Trigger 2.25 oz Recoil pad 4.8oz Total approximately 281oz, which...
  3. P

    Rookie reloader. Best powder for ar15

    I have had great success with xbr8208 from 52 to 75 grain in my Varminter. I have gotten all loads to shoot 0.6 MOA or better in variable temps. Easy to meter for me. Hope that help. Thanks RG
  4. P

    Which brass/powder for 7mm Rem Mag

    Kirkd, You mentioned Indiana so that's the reason I told you about Jays. If you drive it's several hours from the Indiana/Michigan border. I was there today. They have can also ship it with a hazmat fee. Trust me I have thought about it even though I am 70 mins away, but they have the new...
  5. P

    Which brass/powder for 7mm Rem Mag

    Kirkd, I have recently switched to NormaUSA brass for the 7rem mag. This has been excellent brass, on my 3rd reload and no problems. I use my other brass for silhouette shooting not F class. I use 180 Berger Hybrids. They shoot awesome. I currently use R22. There are several 5lbs jugs...
  6. P

    162 Hornady AMAX in stock

    Check out Cabelas! RG
  7. P

    162 Hornady AMAX in stock

    Hey guys, Keeping the sporting community apprised of my findings. Its been 15 months since I have seen these and I wanted to share where I found them. Hopefully this makes someone happy. Powdervalley.com Thanks Hornady for bringing these back. RG
  8. P

    K&M Shooing customer service.

    Hi Wildfowler, I have visited K&M at their facility. I have a few items from them, which includes an arbor press, neck turning tool and deburring tool. The products are great. Roger has always answered my questions and has even trouble shot some concerns I had regarding brass prep. Definitely...
  9. P

    Eliseo R1 tube gun

    Hello, Looking to purchase an R1 soon. Plan on getting the standard equipment with the R1 with recoil pad additionally. For anyone who has purchased an Eliseo tube gun are there any specifics I should consider for the tube gun setup? My plan is to add a pierce action for an .308 FTR build...
  10. P

    When will we see Amax's in stock

    I like to get a hold of more bullets. Anyone have a suggested date besides "Seasonal?" I am looking for 162gr and 75gr. This is getting so old. Thx, RG
  11. P

    Gem Pro readout changing..

    I appreciate everyone's suggestions. Update: Change electrical outlet (four total), wiped the unit and my hands with a dryer sheet, used batteries, turned off all electrical noise nearby, warmed up the unit for an hour and calibrated the scale each time on "Scale". Not going to use it...
  12. P

    Gem Pro readout changing..

    Powermac, Thank you. I went to a separate outlet and the calibrated the scale after warming it up for 30 mins. It helps and my readout is better. No fluorescent lights with this trial. But I will not use it right now as I still get fluctuations. This time it goes up a few grams and comes...
  13. P

    7mm rem mag load data?

    Powermac, I changed my mind on the R19 and the 180s. I am going to continue with H4831sc. I also have a H1000 to play with for the 180 hybrids. H4831sc gave me decent accuracy .4moa, however speed was at 2710 with .10 jump. Going back to the range to fine tune the load this weekend...
  14. P

    Gem Pro readout changing..

    It's interesting that I just installed fluorescent lights above my work table. I will check it out tonight. RG
  15. P

    Gem Pro readout changing..

    Hi everyone, While using my GemPro 250, I began to notice the values begin to decrease. Every few seconds causes the values to drop a few grains. I calibrate it on "scale" with my 20gram weight. Put on a hard surface with my vibration pad underneath, center the balance bubble, move my...
  16. P

    7mm rem mag load data?

    Hi Chris, I appreciate you sharing your information. I may give it a shot this weekend. Which brass are you using? RG
  17. P

    7mm rem mag load data?

    IJ04, I appreciate the link. I have reviewed the load data, it's good. I couldn't find the load range for R19 and Berger 180 hybrids. Not sure that its a good combo at all. I have used R19 and SMK168 and it's a great combo. I got the info from sierra tech support. It consistently gives me...
  18. P

    Bushmaster Varminter capability?

    Anyone have any insights? I appreciate it. RG
  19. P

    7mm rem mag load data?

    Hello, I currently have a few pounds of R19 and wanted to know if anyone has used this powder with either Hornady's 162 AMax or Berger 180 hybrid in the 7mm remington magnum. I called Alliant and they only have recipes for R17 and R22 for either of these bullets. The powder I have used...
  20. P

    Bushmaster Varminter capability?

    Hello, I am currently shooting a bushmaster Varminter with a 1/9 twist and 24" barrel. I have been able to shoot out to 500 yds fairly consistently with good precision, however I have noticed that at 600 yds, the wind starts to really push the bullet and my consistency drops. I am...
Top Bottom
Back
Home
Forums
Merch
Alerts