Search results

Search the forum Search Articles
  1. R

    Loads for 6.5 SAUM 4S

    I received my GAP built Rifle in 6.5 GAP 4S and I have been using CopperCreek Ammo up to this point collecting brass and breaking in the barrel. I am now ready to develop a load via a ladder test using both H1000 and IMR 7977 for both Berger 140 and 130 Grn bullets. What are a good starting...
  2. R

    6.5 for Gas Guns

    What has been your experience shooting 6.5's in Gas Guns? Specifically in .260? Is there a different 6.5 Cal that works better? I just bought a new 308 Barrel for my LMT and want to re-use the old barrel extension with a different caliber barrel.
  3. R

    Neck Turning - Issue

    I typically neck turn my brass when converting cases from 7mm Rem SAUM to 6.5 SAUM but over the weekend I turned some 5.56 LC Brass to try to fix the concentricity of the case. I ran the test shooting my 77gr. standard load vs the same load but with the brass neck turned to see what difference...
  4. R

    GA Precision Current Lead Times

    It's great to have the old Hide back. Speaking of the old days, there use to be a tread about the current GA Precision Lead Times. Is that still an active thread? If so, I can't find it. Thanks JR
  5. R

    LMT Rifle Backlog Now 3 to 4 Years Long

    From thetruthaboutguns.com LMT Rifle Backlog Now 3 to 4 Years Long | The Truth About GunsThe Truth About Guns "LMT makes some pretty nice rifles, especially their .308 Win chambered AR-10 variant. Apparently so many prospective firearms buyers agree with that assessment that their waiting...
  6. R

    Gunsmithing AR-15 Gunsmith recommendations

    Does anyone have a recommendations on a gunsmith that does work on AR-15's particularly barrel work?
  7. R

    Brownell's Pmag Backorders?

    I saw the above posts and i was about to break. I was about to have a temper tantrum and start crying like the tread over at Barf.com but I just saw that my Black 308 5 pack of PMAGS shipped. TFG! Info to help anyone else out who's still waiting on 308 Mags, I ordered them on Dec 21st and the...
  8. R

    benefit to the anti rotation trigger pins?

    +1 like everyone else said I run all Geissele triggers in all my AR's and they said to stay away from these.
  9. R

    Slide Fire???

    They already are DiFi loves talking about how they turn Semi's into full Autos. They are even bringing up in IL in their AWB proposed bill. I agree I wish they didn't exist because they do us no favors.
  10. R

    Brownell's Pmag Backorders?

    Re: Brownell's Pmag Backorders? Look at what the Geeks over at Barf.com created. It's an order tracker that is based off previous orders originating date and ship date. It's not run by Brownells so it's un-scientific but it may help or in my case creates more questions than answers...
  11. R

    Brownell's Pmag Backorders?

    Re: Brownell's Pmag Backorders? Strykervet unrelated to pmags and Brownells I had the same issue with my G19 and P226 I randomly went to Top Gun Supply and asked to be notified when they received shipments I got an email yesterday for the G19, those shipped last night and I got some P226 last...
  12. R

    Brownell's Pmag Backorders?

    Re: Brownell's Pmag Backorders? Ordered 10 Pack of Brownells CS on 12/21 Shipped 1/24 Ordered 5 Pack Black 308 PMags on 12/21 - No ETA on Shipping Ordered 10 Pack Black Non-Window Gen2 PMags on 12/21 - No ETA on shipping. Am I correct that people who have ordered PMags later in December...
  13. R

    Rifle Scopes GDI P-ROM Model L Torque Value

    Re: GDI P-ROM Model L Torque Value The torque value for the screws on the cap is 21inlbs.
  14. R

    Rifle Scopes NF mil-spec warranty

    Re: NF mil-spec warranty just does, they probably feel that since it's glued together it's not something they could fix anyways. Regardless, you would be better off going with an F1 with a different reticle like the MD 2.0 plus you will get the better warranty.
  15. R

    Next Bolt Gun Build

    Looking at building another Bolt gun thinking either 300win, .260 Rem or a 6.5 Creedmoor. Anyone have any input?
  16. R

    LMT MWS barrel bolts

    Re: LMT MWS barrel bolts I believe they will send you two. That being said when I snapped mine they sent them for free and I had them in two days. They have pretty fast turn around. Stick with their bolts though.
  17. R

    Nice craftsman torque wrench for LMT on sale $60 !

    Re: Nice craftsman torque wrench for LMT on sale $60 ! I used the LMT wrench a few days back and sheared off the bolt head. For some reason I had a HF torque wrench that I bought for one of my AR15 projects. I figured I would give it a try but this time I was smarter. I wanted to see if the...
  18. R

    What's going on over at Rainier Arms

    Re: What's going on over at Rainier Arms <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RWSGunsmithing</div><div class="ubbcode-body">Click there notify button. You will be surprised how soon you might get a email stating they have more. All I can say is when...
  19. R

    What's going on over at Rainier Arms

    What's going on over at Rainier Arms? I can't give them my money, they don't have any stock. Particularly on uppers, lowers and a large portion their barrels.
  20. R

    Rifle Scopes Hensoldt 3.5-28x56mm

    Any word on when the new Hensoldt 3.5-28x56mm from S.H.O.T will become available? Any word on price point?
Top Bottom
Back
Home
Forums
Merch
Alerts