• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Search results

Search the forum Search Articles
  1. J

    Where are you buying your bullets?

    Re: Where are you buying your bullets? midway
  2. J

    Any tips for a hornady AP progressive?

    Re: Any tips for a hornady AP progressive? I use TAC powder and it feeds and measures very well. Did you clean the powder measure per the instructions with the dry lube? Also on the primer you might sand or polish, or make sure it is clean and lubricated. I usually shoot a little air to...
  3. J

    Hand Loading for Long Range 3: finding start OAL

    Re: Hand Loading for Long Range 3: finding start OAL That is the process I use for finding oal.
  4. J

    Hand loading for Long range 1: brass case prep

    Re: Hand loading for Long range 1: brass case prep For utmost accuracy I would also suggest neck turning.
  5. J

    Suppressors All you guys with Cans

    Re: All you guys with Cans Once you go suppressed you will not go back. Legall in Texas for deer this season.
  6. J

    Gunsmithing Coating a Scope with Cerakote.

    Re: Coating a Scope with Cerakote. degrease only, scotch brite at the most.
  7. J

    Gunsmithing Krieger Barrels ?

    Re: Krieger Barrels ? Only Krieger!!!
  8. J

    Gunsmithing Bedding Screw Up

    Re: Bedding Screw Up Good luck. If you have one spot that wasn't treated properly you will have to cut it out.
  9. J

    Gunsmithing 700 X-Mark Pro Trigger

    Re: 700 X-Mark Pro Trigger I bought a remi last year and it never went below 3.5#, I put a Jewell trigger and it tightened up my groups drastically. I just got a new remi same situation.So no big hopes on the xmark.
  10. J

    Gunsmithing Objective research on Barrel Break-in procedures

    Re: Objective research on Barrel Break-in procedures I was told on a new barrel, shoot 6, clean repeat.
  11. J

    Firearms Price Rise On The Way !

    Re: Firearms Price Rise On The Way ! I would agree there is a problem with supply. Try to go on a website like Midway or Brownells and buy all the components to build an AR. It's not happening, limited bolt carrier, upper receivers, handguards, everything is in very limited supply. My last...
  12. J

    Gunsmithing AR Build / Extra Heavy Barrel / Barrel Nut

    Re: AR Build / Extra Heavy Barrel / Barrel Nut Gman, could not wait. I did "hog" out the inside of the barrel nut, it's a perfect fit and the build is complete.
  13. J

    Gunsmithing AR Build / Extra Heavy Barrel / Barrel Nut

    Re: AR Build / Extra Heavy Barrel / Barrel Nut Doc, I missed typed the barrel is 1.050 the inside diameter of the nut is 1.010. So I need to enlarge iniside diameter of nut by at least .040.
  14. J

    Gunsmithing AR Build / Extra Heavy Barrel / Barrel Nut

    Re: AR Build / Extra Heavy Barrel / Barrel Nut That is the barrel. That sounds like those are my only options, I thought this might be a common problem. I searched for barrel nuts on quite a few sites with no luck. Of course if I started this build on Friday I could have contacted someone...
  15. J

    Gunsmithing AR Build / Extra Heavy Barrel / Barrel Nut

    Re: AR Build / Extra Heavy Barrel / Barrel Nut The barrel has the barrel extension attached and it does fit into the receiver. The barrel came from Midway and is a Model 1 sales barrel. The handguard is Yankee hill and it came from Midway, and included the free float barrel nut.
  16. J

    Loads Needed for 300 Blackout

    Re: Loads Needed for 300 Blackout DarkD, I load for 300 Win Mag. and .308, so I have all ranges of bullets on my shelf. I was thinking on the supersonic 125 gr. sierra spitzer, 150 FMJ, and a subsonic at 200 or 220, or anythinig else if you can load lighter. I went with the blackout...
  17. J

    Loads Needed for 300 Blackout

    Re: Loads Needed for 300 Blackout Armorchikn, thanks for your suggestion on the Sierra manual I do have that exact one but the loads were developed for a Thompson Pistol figured there would be a little difference. I am waiting on my upper and thought I would get a few loads together.
  18. J

    Loads Needed for 300 Blackout

    I am currently working on a Blackout build. It will have a 16" barrel. I am looking for proven loads for 125 Gr Sierra, 150 Gr Hornady Full Metal Jacket, and anything else 168 MK, 200 Mk, etc. I have H110, AA1680, and Lil Gun powders on hand.
  19. J

    Remington rifles

    Re: Remington rifles If i remember correctly the 5r is the MilSpec remi.
  20. J

    What is the range and average COAL 700P .308 SA?

    Re: What is the range and average COAL 700P .308 SA? I have a remington sps .308, when I measureed using the hornady tool I came up with 3.010. as a few others have stated there is not enough grip for the shell to hold the bulet. My best groups come at 2.775. I have loads worked up for 2.8...
Top Bottom
Back
Home
Forums
Merch
Alerts