• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Search results

Search the forum Search Articles
  1. P

    260 Rem Load Question

    Re: 260 Rem Load Question PM sent on this
  2. P

    260 Rem Load Question

    Re: 260 Rem Load Question Something is wrong here, measuring mine from tip to base without comparator it is 2.74 to the rifling using 139sc bullets. You dont have a short chamber for sure, If anything it has a long throat. When I use a Hornady comparator I include the inch that the...
  3. P

    260 Rem Load Question

    Re: 260 Rem Load Question I had to break the barrel in as well, forgot to add that.
  4. P

    260 Rem Load Question

    Re: 260 Rem Load Question Compact, I got you guys mixed up, now that I know you have the bolt you got a way to go with it. George used a Bartlein barrel on my build with a standard 260 chamber, did you spec a standard chamber? I looked at my records and the 139SC touches the lands at 3.188...
  5. P

    260 Rem Load Question

    Re: 260 Rem Load Question sorry, I dont have any loaded up now, I shot the last yesterday when I was working on the 338. You can probably shrink it down just a little more with some tuning, but that is a good group. I forgot that your using the ar10 platform and not a bolt gun. I haven't...
  6. P

    260 Rem Load Question

    Re: 260 Rem Load Question some people have good luck with jumping VLD's and Berger has a good article on their website about it. I have had better luck with the jam on VLD's
  7. P

    260 Rem Load Question

    Re: 260 Rem Load Question Compact45, My loads using the 139sc measure 3.168 COL using Hornady Comparator. Im pushing them out at 2790-2800FPS out of a 22 inch Bartlein barrel. Im not the best at explaining things but for a rule of thumb VLD bullets like to be jammed into the lands, Berger...
  8. P

    110 FCP-HS 338LM in need of advice

    Re: 110 FCP-HS 338LM in need of advice Thanks aloreman, I will try backing off the lands again and see what happens. So far my best luck has been just touching the lands. Will try your load and a few others next week and see what it does.
  9. P

    260 Rem Load Question

    Re: 260 Rem Load Question Im using 43graing of h4350, 139SC jumping to the lands using Lapua brass and 210M primers in my GAP260. Shoots one hole all day long if I do my part. If your getting the Ejector mark stop there and back off a little, What velocity are you running and are you...
  10. P

    110 FCP-HS 338LM in need of advice

    Re: 110 FCP-HS 338LM in need of advice Load Data anyone with a FCP-HS?
  11. P

    110 FCP-HS 338LM in need of advice

    Re: 110 FCP-HS 338LM in need of advice all reloads to date..
  12. P

    110 FCP-HS 338LM in need of advice

    Re: 110 FCP-HS 338LM in need of advice All tight, it was loose after the first round of shooting. Bedded the action as well.
  13. P

    110 FCP-HS 338LM in need of advice

    Hi Guys, I bought the 110 last november and been trying to get a load for it lined out. Ive tried 300 OTM, 250 SMK, 300SMK, and 285HHP. Used PPU and Lapua Brass. CCI and 215M primers. RX25,US869, Retumbo, and 8700 powder. Ive jumped and jammed the bullets, tried Forster, Redding, and RCBS...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts