Search results

  1. NHPiper

    Your PVA prefit experience

    I had a hard time too, but I think a lot of it was the muzzle brake. I also could not load a 223AI with any powder close to where I had been at previously, I think because the freebore was tighter (that was on me, I gave them a loaded round and should have just asked for a longer FB). I got...
  2. NHPiper

    Night Vision Basic Thermal Clip ON Q's.

    Can see it at 3.6. For me though, the bottom end looks best at 5x. An illuminated reticle would probably help at the 3.6-5x if the reticle is finer.
  3. NHPiper

    Night Vision Basic Thermal Clip ON Q's.

    I use a Mk5 3.6-18 with a T3 reticle on a Steiner C35 and Guide TA651. It works great.
  4. NHPiper

    Suppressors Form 4 wait time

    Did a Form 4 eFile on 12/6 via silencershop with two responsible persons and was approved 60 days later. I haven't seen prior submissions make it faster. I have a dozen plus various stamps.
  5. NHPiper

    NX8 or Mk5? or?

    I wasn't a fan of several NX8. The zero stop bound on the 2.5-20 and was a PITA. Then it and several 1-8s has a bad fishbowl to my eye. The one nice thing on the 2.5-20 is you can set the zero stop to dial down for a speed factor drop or something. I still have 2 or 3 Mk5 3.6-18 Tremor 3s that...
  6. NHPiper

    Your PVA prefit experience

    Nice! Makes me feel better that I'm getting just under 2,800.
  7. NHPiper

    Your PVA prefit experience

    Haha I had the same question. I am running 230 A Tips at 2780 with a charge of Retumbo in a 24" barrel. Could go hotter but shoots great with single SDs.
  8. NHPiper

    Your PVA prefit experience

    About exactly how my 300PRC shoots. What did you get for speed with the factory ammo?
  9. NHPiper

    Your PVA prefit experience

    I would give them a call. Josh and Ben are great to deal with and have a ton of great info to share. They just came out of Shot Show as well. I had some issues with a recent barrel that I ultimately tracked down to the muzzle brake. I spent 300 rounds, about 280 rounds too many, before I...
  10. NHPiper

    Ridgeline Defense RD-15 LPR

    I just dropped a new RC3 onto my RD15 upper and it loves the harmonics. I shot the smallest gas gun group I have ever shot. Probably got lucky but still.... It likes 23.8gr of 8208 and 77SMKs.
  11. NHPiper

    Precision Rifle Gear Tango Innovations FIRE4000 WMLRF Initial Impressions

    Got it, thanks for confirming! I unlink my Bluetooth with my phone using the Vortex. I have accidentally erased the data too many times, so I like being able to flip between rifles profiles on the unit. Probably not the end of the world.
  12. NHPiper

    SOLD AI Picatinny Rail w. QD

    I do. I also have a Sage Green Harris Bipod mount/stud that is unused. I would take $50 for.
  13. NHPiper

    Precision Rifle Gear Tango Innovations FIRE4000 WMLRF Initial Impressions

    Does the unit have saved profiles for rifles like the Vortex? Or do you use the app to select a profile, then can disconnect?
  14. NHPiper

    Precision Rifle Gear Tango Innovations FIRE4000 WMLRF Initial Impressions

    Thanks for doing this! I'm really curious about the cold test. I'm not super thrilled with the issue that you ran into unlinking with Bluetooth for the AB. Hoping that gets solved.
  15. NHPiper

    PRI Mk 12 Mod 0 gen III: how gassy with a flow-through suppressor?

    I ran a PRI Mk12 Mod 0 that had a Bartlein barrel swapped in and my buddy has a one with the PRI Douglas barrel. We both used the OCM5. Gas is not bad at all. I still have a Mk12 Mod 1 that I felt was a bit over gassed so I swapped the BRT gas tube in. You should be able to easily do that on...
  16. NHPiper

    Tangoinnos Fire4000

    Sweet! Where did you snag yours? Can't wait to hear the performance review!
  17. NHPiper

    Tangoinnos Fire4000

    I got confused reading the manual. Does it have onboard AB?
  18. NHPiper

    SOLD AI Picatinny Rail w. QD

    Bump
  19. NHPiper

    Night Vision New Team Member @ Strictly Offensive Kit!

    Tyler is great! He helped me get setup with a new Guide thermal. Great to see the team growing!!