It should work fine depending on if the portion of the body die the neck goes into is big enough not to cause a problem. The opposite would be a concern for the neck die. If the body portion of the neck die isn't large enough in diameter to accommodate the larger body diameter it could be a...
Here you go. It is a tungsten bucking bar. They have gone up a bit since I got mine but it still adds a good amount of weight in a small package. Be aware that drilling it is not fun.
Badger efr as mentioned above mounted in a mcmillan a3-5. Mine was set for a clip on nv so you might need to check spacing for your optic of choice and the placement of the efr.
I briefly tried some 140gr acubonds and didn't initially find a load I was happy with. That and the 120 nosler was absolutely devastating on critters so I stuck with it.
I'm on my second barrel so I guess you could say I'm satisfied. Imo it really depends upon what your end goal is. I primarily use mine for hunting these days and it does great. My loads while not really screaming are super consistent in all weather conditions. I've ran it some at prs matches and...
I ran 162gr amax/eld and 120gr nosler in my 22" 08ai. The 162 ran consistently at 2750fps and 3150 with the 120's. Had a batch of varget from the pre Obama era that was good for around 50fps more on both but everything since has been what I mentioned above.
I have a 22 creed and a couple 223ai's. Both are very capable but not exactly comparable. The creed runs 90gr Berger's at 3150 while a hammer it gets hot pretty fast and absolutely had to be cleaned every 300-350 rounds or it will blow bullets up in flight. It could be due to the barrel being a...
Bourbon over rye for me. It's mainly because a lot of the rye's I've tried tend to mess my allergies up and more than one glass I'll almost end up with a sinus infection. This is one of my favorites as of lately.