• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. D

    Gunsmithing Jewell AR-15 Trigger Adjustment

    Re: Jewell AR-15 Trigger Adjustment Adjust first stage pull weight heavier(torsion spring engaged in notched wheel on LH side) & run 100 rounds thru the rifle prior to adjusting for light pull weight.
  2. D

    Gunsmithing custom gas tap

    Re: custom gas tap Bore it to i/d desired.
  3. D

    Timney tactical trigger??

    Re: Timney tactical trigger?? If an adjustable straight trigger shoe is desired have an Anschutz trigger group fit to the action & don't mess around with junk.
  4. D

    Gunsmithing custom gas tap

    Re: custom gas tap Modify 1 of the ArmaLite gas blocks.
  5. D

    Gunsmithing Recommended cleaning/ lube for a Jewell?

    Re: Recommended cleaning/ lube for a Hewell? I prefer Coleman Fuel compared to lighter fluid for cleaning trigger groups as the Coleman Fuel is less expensive,is readily available & has rust inhibitors added. For neglected trigger groups I'll spray them with acetone followed by the Coleman Fuel.
  6. D

    Gunsmithing Cleaning chamber, will this work

    Re: Cleaning chamber, will this work Super Lube Grease on/in Bolt gun- Bolt Lugs. Extraction Cam Surfaces. F/Pin shroud threads. Cocking Cam. Super Lube spray on/in gas gun- Upper receiver & Charging Handle. Bolt & Carrier assy. F/Pin.
  7. D

    Gunsmithing Aluminum replacement firing pins

    Re: Aluminum replacement firing pins A lighter than stock f/pin w/appropriate mainspring will NOT reduce lock time. Most controlled round feed rifles need all the gimmicks on the market to be a couple milliseconds faster than a flintlock.
  8. D

    Gunsmithing Remington 5R problem.

    Re: Remington 5R problem. The Timney trigger group is the problem. The mis-fit Timney housing is allowing the sear to drag on the f/pin striker causing your mis-fires. Install the OEM trigger group & your problem with mis-fires will be history.
  9. D

    Gunsmithing Adding an Adjustable Cheek Piece

    Re: Adding an Adjustable Cheek Piece Those that can't drill two holes & insert 2 carriage bolts w/knobs on the correct side of the stock would assume 100+ dollars for thumb wheel cheek piece hardware too expensive- Seams the thumb screw knobs of your Tupperware cheekpiece are installed ass...
  10. D

    AR Trigger: Single or Two Stage?

    Re: AR Trigger: Single or Two Stage? Install a Geissele or Jewell 2 stage & don't look back.
  11. D

    Gunsmithing cast lead bullets in a semi-auto

    Re: cast lead bullets in a semi-auto If the cast bullets are .451/.452 for the 45 Colt load & shoot to your hearts content. To ease cleaning in your XD after shooting un-gas checked cast bullets fire several jacketed bullets. Do not shoot the cast bullets in a Desert Eagle,as the lube/lead...
  12. D

    Gunsmithing remy 700 firing pin replacement

    Re: remy 700 firing pin replacement The striker cross pin is installed from right to left from Remington. Remove from left to right. Some cross pin holes in the firing pin shanks are not centered & can be stubborn to remove. Deburr the 3/32" cross pin hole in the f/pin shank with a half...
  13. D

    Gunsmithing Adding an Adjustable Cheek Piece

    Re: Adding an Adjustable Cheek Piece Part the comb with a slitting saw in a mill. Inlet the stock in the mill for the Warner Tool Co. Thumb Wheel Cheek piece Hardware. Removable without adjustment,Returns to location for easy bolt removal,Cast On/Cast Off Adjustable. WTC manufactured...
  14. D

    Another Badger bolt knob down!

    Re: Another Badger bolt knob down! The handle will jump off the body the next time it is abused. Downloading & putting a couple clicks of elevation is less expensive than repairing bolt handles/knobs.
  15. D

    Phoenix Machine RR receivers

    Re: Phoenix Machine RR receivers Gooood Luck!!
  16. D

    Gunsmithing Model 700 bolt

    Re: Model 700 bolt As well as Borden,BAT,Hall,Lawton,Pierce,Searcy,Stiller,Stolle,Phoenix bolt handles being silver brazed to the bolt bodies.
  17. D

    Another Badger bolt knob down!

    Re: Another Badger bolt knob down! Handle Location & Timing will ease extraction.
  18. D

    Another Badger bolt knob down!

    Re: Another Badger bolt knob down! Adding a bowling ball or Louisville Slugger baseball bat to assist bolt manipulation, regardless how attached, does not address the LOCATION/TIMING/EXTRACTION issues.
  19. D

    Gunsmithing X-Mark trigger question???

    Re: X-Mark trigger question??? The X Mark Pro trigger group is not your best option. Have a 2 stage installed & don't look back.
  20. D

    7mm saum

    Re: 7mm saum Throat & twist it for the projectile that you plan to shoot LR. The 180VLD's w/ a 1:9" twist got my nod in the RSAUM chambering.
Top Bottom
Back
Home
Forums
Merch
Alerts