• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. S

    .308 subsonic loads

    Re: .308 subsonic loads <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TX COWDOC</div><div class="ubbcode-body">Is there such a thing as a hollow point round nose type rifle bullet in 30 cal? </div></div> Sierra has a 125 grain HP for the 30/30 and also Speer...
  2. S

    .

    Re: Poll on brass life a little prudence at the load bench on powder volume... and annealing every 4th reload.. using a Lee Neck Sizer and a Redding Body die as needed.. in a bolt gun ( Model 700 Rem)... on an experiment... I loaded 10 cases of Rem brass in 223.. a total of one hundred...
  3. S

    Subsonic 308 w/ SR4759

    Re: Subsonic 308 w/ SR4759 or AA5744? I use SR 4759 for a lot of my loads... always consistent and accurate... 5744 has too big of a bang each time you pull the trigger..
  4. S

    Who is using Neck Dies ONLY???????????

    Re: Who is using Neck Dies ONLY??????????? Between a neck sizer, and a Redding Body Die, plus annealing every 4th reload... not onl am I am noticing greater accuracy in my ammo, but case life has gone to unbelievable life span...
  5. S

    6.5L vs. 6.5C vs. .260?

    Re: 6.5L vs. 6.5C vs. .260? When looking at problem in 6mm, I found that a 6mm Remington, with a one in 7 twist, and on a long action, trumped a 243 substantially on performance ( read velocity and accuracy)... Velocity equaled a 6mm/06.. with less powder... so building a long range rifle...
  6. S

    6.5x55 over 260Rem

    Re: 6.5x55 over 260Rem owning and shooting both, I wouldn't be without either one... they are essentially two shades of the same color... just remember most 6.5 bullets are meant to perform at the old Swede velocity ranges... so being able to push them faster, doesn't necessarily provide...
  7. S

    Hottest load for .223?

    Re: Hottest load for .223? Not here to engage in a pissing contest... nor will I... seems you are more full of yourself and your 'knowledge' that you think no one has any experience or expertise anywhere near approaching yours... so you must accept my apologies for raining on your Pompous...
  8. S

    Hottest load for .223?

    Re: Hottest load for .223? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AUJohn</div><div class="ubbcode-body">Why? What will you gain? If you can't hit the thing you want to put it in shock by getting close and then doing it with a hammer? Stupid. You should...
  9. S

    Stevens 200 build up advice

    Re: Stevens 200 build up advice My last 4 ER Shaw barrels have all been very tight shooters, better than any factory barrel I have had... the only down side is the very very long wait to get one..... IT&D Gunsmithing out of Ohio, can set you up with a Douglas barrel, (cheaper than the...
  10. S

    260 sub sonic

    Re: 260 sub sonic I work a lot with that sort of stuff.. what is your application? I shoot a lot of 260 also..there are more accurate powders than Trail Boss if you are looking for distance... are you punching paper long range, or are you looking to do something more seriously with the...
  11. S

    30-06 POWDER RECOMENDATION

    Re: 30-06 POWDER RECOMENDATION I use 4064 for bullet weights 180 grains and under.. and 4831 SC for bullet weights over that, if I want to push them.. RL 17 looks like a good choice although I haven't played with it very much...
  12. S

    Hottest load for .223?

    Re: Hottest load for .223? with a 40 grainer, in a bolt action.. ( all that I shoot), then 4000 fps is safely possible using RL 7....
  13. S

    Redding Body die

    Re: Redding Body die For the most concentric bullets I can get, I use a Redding body die if the shoulder needs bumped back.. and a Lee Collet Die to neck size it.. sure it takes multiple steps, but when looking for the most accurate ammo... what is an extra step of two..
  14. S

    6.5x55 Varget loads. (modern action)

    Re: 6.5x55 Varget loads. (modern action) <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JWV</div><div class="ubbcode-body">That makes good sense wade. I am using a modern savage action so there are no worries there. Is the 6.5x55 capacity about 10% more than the...
  15. S

    260

    Re: 260 Here's a real useful link... this is data for a 120 grain bullet, so you can start a little low and work up.. http://www.stevespages.com/264_12_120.html I tend to like 4064 and powders in that burn range for the 120 to 129 bullets... you can also call Sierra at 1 800. 223. 8799 If...
  16. S

    6.8 SPC Loads

    Since you folks are more in the know than a few other forums I frequent, and being new here... The MV of the 6.8 SPC... how effective is that? What kind of range should be looked at as max point blank range where the round will still do some damage? Asking, because as a handloader. really...
Top Bottom
Back
Home
Forums
Merch
Alerts