• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. Bigjake83

    Knights Armament SR25 6.5 Creedmoor

    Gassers have 3 recoil impulse compared to bolt rifles which only have one, it's all about timing and maintaining shooting fundamentals for each platform. When comparing the two platforms a halfway decent semi-auto shooter can have faster successful impact follow up shots when shooting a man...
  2. Bigjake83

    Seekins SP10 Review. Craddock/Proof Research

    IIRC the OEM Seekins SP10 BCG is Armalite Pattern, the Bolt will fit but it's the floating JP DPMS firing pin that's the issue. With the absence of the Armalite Springed Fring Pin the JP FirinpiPin and Seekins Carrier allows even more room for the JP pin to gain momentum with chambering and...
  3. Bigjake83

    Knights Armament SR25 6.5 Creedmoor

    I find shooting 10-20rd groups easier than multiple 5rd groups, especially if you're coming on and off your rifle to load your mag after every group. I forgot who asked, but someone asked to see some 20rd groups out of the new 18" Geissele SPR Cut Rifled barrels. I used this as a Data...
  4. Bigjake83

    Knights Armament SR25 6.5 Creedmoor

    When I'm doing a private training course that is the number one issue I have with most people, keeping that trigger pulled to the rear until your rifle recovers then reset. Next time you're out give this a try. Spend a good couple hours shooting your Large Frame gassers to the point you feel...
  5. Bigjake83

    Knights Armament SR25 6.5 Creedmoor

  6. Bigjake83

    Knights Armament SR25 6.5 Creedmoor

    You and @KimberGuy we're the only two people to step up, Kimber kept a respectable Average but he used the 22" 6.5CM and Handloads, you used a .308 with Factory FGMM and if it wasn't for that one group 1.15" MOA group it would have been damn close. Have you done any Load Development for your...
  7. Bigjake83

    New Home Defense Rifle Suggestions

    I keep this one under my pillow next to my Jumbo Oversized Anal Beads, when used in conjunction with one another, creates the perfect combination of lethality and psychological damage because if for some reason the perpetrator survives he'll still have to explain to the court why he has a...
  8. Bigjake83

    Geissele's New Heavy Barrel and SOLGW Broadsword project. (Up Date, 1st Load development session 18DEC24))

    Had a chance to try some of the Hotter Loads with Geissele SPR and 22" Kreiger JP SCI-20. Still haven't seen any pressure signs working all the way up to 24.7grs of Tac in 18" SPR and 24.1 in the 22" Kreiger. 22" Kreiger Decent results with 23.7gr and 24.1gr 18" Geissele SPR. 24.5gr Tac...
  9. Bigjake83

    Noveske DDF Barrels

    You seem really fixated on calling people out, any particular reason? Are you someone of importance? Do you work in the Firearms industry?
  10. Bigjake83

    Noveske DDF Barrels

    .076
  11. Bigjake83

    AR Positional POI Shift Test

    1/2"
  12. Bigjake83

    AR Positional POI Shift Test

  13. Bigjake83

    AR Positional POI Shift Test

    LWRC Barrel Nut Wrench $145, Custom work $50, shipping $25... Having the ability to run any Barrel in my LWRC's....Priceless
  14. Bigjake83

    AR Positional POI Shift Test

    I also got the load development done for the JP SCI-20 so I'll finally be able to contribute to this thread. For the POI shift I've got 3 rifles I want to test. Larue OBR / 14.5" 6 ARC JP SCI-20 / 22" Kreiger .223 Mega Monolithic / 20" Bartlein .223
  15. Bigjake83

    AR Positional POI Shift Test

    I've been really impressed with both of my LWRC DI's. I bought them to be cheap ammo blasters but the 16" is very accurate, is Okay.. 1 MOA-ish. I just had a custom Barrel nut Wrench made so I can swap barrels up to 1" If anyone has ever used the LWRC Barrel nut Wrench you know that it is...
  16. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    Well the SPR barrel is 18" so I'd say you could safely add 48fps, but keep in mind that you have a CLE Chamber. None of mine liked the Hot loads, my go to load for my CLE load is 77 SMK 23.5gr TAC, LC Brass and BR4 Primers. I would start your load development at 23gr of TAC and work up 24gr it...
  17. Bigjake83

    New Purchase?

    I hear the Jacksonville FL Sheriff's Office love them.
  18. Bigjake83

    New Purchase?

    That's the same design as my Broadsword Builds that I'm using with the Geissele barrels as far as how the Upper and Handguard mate to each other, very solid.
  19. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    Hard pass.
  20. Bigjake83

    Gunsmith to make AR barrel

    Craddock does great work as well, but the OP will be waiting for months. Paul Ross is pretty open at the moment.
Top Bottom
Back
Home
Forums
Merch
Alerts