• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. M

    wanted Reloading info for 300 Ulta Mag

    Re: Reloading info for 300 Ulta Mag Funk, 210gr SMK? How do you like them over the 210 vld or 220 smk?
  2. M

    Questions on H1000 and 338 Lapua Mag

    Re: Questions on H1000 and 338 Lapua Mag Jeff, I just finished my load development (338 edge)...again for this new stuff and I am shooting 89.2gr of h1000 out of a 30" brux. Very accurate, but I am very curious to see how fast it shoots. Glad to see I'm not alone in the very low charge weights.
  3. M

    Any Idea How Many FPS Edge 300 SMK 89.2gr H1000?

    I do not have access to a chrono and was curious how fast this load shoots from a 30" Brux, 300 SMK, Win LRM primers and 89.2 gr of the new hotter H1000. I had to change my load due to shooting old H1000 at 92 gr then loosening up 15 primer pockets due to the new hotter H1000. Thanks guys.
  4. M

    $500 max to spend what 308 bolt do you buy?

    Re: $500 max to spend what 308 bolt do you buy? Savage with Accu-Trigger gets my vote. I am very impressed with them.
  5. M

    Questions on H1000 and 338 Lapua Mag

    Re: Questions on H1000 and 338 Lapua Mag The newer H1000 is hotter than that of the past according to many. I found that with my 300 rum and edge. Search and you will find many having a problem with H1000 loads being much lower than in the past.
  6. M

    Primer Pocket Blow Out???

    Re: Primer Pocket Blow Out??? Don't assume anything I would rather hear it twice than not know it. I was referring to the die touching the shoulder. Then I would keep running it down till it fit in the chamber snug with the bolt needing just a bit of help coming down. I hunt in cold...
  7. M

    Primer Pocket Blow Out???

    Re: Primer Pocket Blow Out??? The info is appreciated Gentlemen. I use a standard lee priming tool. These were winchester primers. I bump the shoulder just a touch when resizing after firing. I use the neck sizer and run it down till it touches, then twist a touch more (.002~) so it...
  8. M

    Primer Pocket Blow Out???

    Re: Primer Pocket Blow Out??? Do any of these look like primer flattening? They look somewhat flat in person, but the pics don't show it as much.
  9. M

    Primer Pocket Blow Out???

    I reloaded some 300wsm. After shooting, I noticed that the primers were all flat. I also noticed on one case, that there was a blackened rip from the primer pocket. What exactly caused this? Just overpressure? Is any flattening of the primer bad, or is it only if it is accompanied by a...
  10. M

    wanted Reloading info for 300 Ulta Mag

    Re: Reloading info for 300 Ulta Mag Rot, Many of us shoot them. If you search on google for something like "300 ultra load data snipershide" you will find a lot. That said, here is what mine like: Rem 700 LSS 26" RWS Brake, bedded, trigger job. Nothing fancy. Rem Brass trimmed to 2.845...
  11. M

    Gunsmithing Keep Ross (RWS) in your Prayers

    Re: Keep Ross (RWS) in your Prayers Didn't know there was another thread. Mods, feel free to delete. Just wanted to make sure we all knew.
  12. M

    Gunsmithing Keep Ross (RWS) in your Prayers

    He has been a long time member on here and known for his muzzle brakes. He was in a pretty bad accident and has been in the hospital for over a week.
  13. M

    Is Fire Forming Cases Worth it???

    Re: Is Fire Forming Cases Worth it??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MitchAlsup</div><div class="ubbcode-body">Look at it this way. The only way not to fire form your cases is to load 'em up and put the ammo on the shelf. What fun is that...
  14. M

    Is Fire Forming Cases Worth it???

    Re: Is Fire Forming Cases Worth it??? Good to hear gentlemen. If I use the Creighton Audit to find the nodes, will they change at all between the FL sized brass and teh once fired/neck sized brass?
  15. M

    My worst day yet of reloading, feel free to share

    Re: My worst day yet of reloading, feel free to share I was neck turning some 300 rum, then got in a hurry to neck turn some 338 edge. Didn't adjust the cutter enough and cut about 5 necks down to .011 That is what I get for rushing.
  16. M

    Is Fire Forming Cases Worth it???

    I searched and found numerous guys that shoot very competitively, yet don't fire form. Of coarse I found numerous shooters that do. I would prefer to save the $$ if possible since I have 100 375RUM cases to fire form for my 338 EDGE. Thoughts?
  17. M

    Gunsmithing making my own stock!! a little help please

    Re: making my own stock!! a little help please I built my first out of 3 pieces of 1x6 pine just for practice. Good idea to learn lessons on cheap wood before cutting into a $100+ piece of maple. +1 for quilted maple. I built a center channel for my home theater out of quilted maple...
  18. M

    Rifle Scopes Nightforce Resale Price Maintenance

    Re: Nightforce Resale Price Maintenance <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MillSpec</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ToddM</div><div class="ubbcode-body">Considering the amount...
  19. M

    Gunsmithing best muzzle break for 300wm

    Re: best muzzle break for 300wm Get one from RWS (Ross) here on the hide. I have 6 and love them. 2 on 300rums, 2 on 300wsm, 1 on 300wm and 1 on 338 edge. They look great and work great.
  20. M

    Gunsmithing bolt play on a bare action

    Re: bolt play on a bare action What action are you asking about? Rem, Win, Savage?
Top Bottom
Back
Home
Forums
Merch
Alerts