• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. 1

    Reloading for the 7 PRC

    Do you know if your powder has 100% burn rate? The reason I ask is that I found a nice rabbit whole to dive right into in the form of Gordon’s reloading tool and found that with N570 or RL26 (which I still have a good amount of) I wouldn’t get 100% burn rates out of my 22” barrel.
  2. 1

    Reloading for the 7 PRC

    What brass and charge wait are you useing?
  3. 1

    Proof vs Bartlein?

    I did not know their was a 10% off code😢 well John Beanland (Beanland Rifles) gets all of my rifles, this will be number 4 sent to him, so I should be good in the chambering department
  4. 1

    Proof vs Bartlein?

    So because of the Black Friday sale at red hawks rifles I ended up getting a 22” Proof 1:8 twist, Sendero contour. I’ll get the Bartlein for my next rifle build.
  5. 1

    Proof vs Bartlein?

    That make things easy, thanks guys
  6. 1

    Proof vs Bartlein?

    I’m going to re-barrel my R700 with either a proof research or bartlein carbon wrapped. Is there anything real difference between this two or are they both pretty much the same in their quality? Thanks
  7. 1

    Random PRS scope recital question

    I don't know what PRS match you were watching but all the matches I have been competed in had a minimum of 9 rounds per stage, mostly 10 rounds, and up to 12 rounds per stage and with the majority of the stages had several targets at varying ranges. Also I haven't ever had the need for a rifle...
  8. 1

    Random PRS scope recital question

    I should have clarified that these are not top shooters, I'm not saying that Team MDT is switching to these but just more like people that compete regionally. I didn't mean for it to come off as me saying that this is the newest greatest thing. Just something that I had observed.
  9. 1

    Random PRS scope recital question

    Hello everyone, Just more of a curiosity question but for PRS matches are competitors starting to trend back to more conventual scope recitals? For example Leupold's PR3 or ZC's MPCT1X. I know the majority of shooters still use Xmas tree but recently I have seen more than a few people...
  10. 1

    Rifle Scopes Leupold Mark 4HD

    I really wish they would make a version with an illuminated PR2 recital
  11. 1

    Is my barrel f@&ked?!!!

    Quick update. I was able to go and shoot it at 100 yards and at 336 yards (max distance at the location). It appears to shoot just fine, all of my groups according to SubMOA app shot sub 1/2 MOA, with the last group at 336 yards being a .32 MOA group. Feels like a dodged a bullet with this.
  12. 1

    Is my barrel f@&ked?!!!

    This is a Bartlein barrel as well.
  13. 1

    Is my barrel f@&ked?!!!

    I'm using thoro Clean with a nylon bush and using as directed on there package
  14. 1

    Is my barrel f@&ked?!!!

    Ok so the story goes after the PRS match I did over the weekend I went to go and clean my barrel and after cleaning I wanted to check how things look with my new bore scope. I through on the 6mm mirror (shooting 6GT) and it started to get stuck in the barrel a short way in. I pull it out as soon...
  15. 1

    Which Charge weight should I use?

    6.5 CM, staball 6.5, Hornady brass, cci BR-2’s
  16. 1

    Which Charge weight should I use?

    Hello everyone, I'm not experienced with load development and I would like your opinion. While shooting through my crono I found two areas of interest and would like to know which I should pursue. The first was that the charge weights of 42.2gr and 42.5gr had almost equal average MV of 2634fps...
  17. 1

    Sizing Wax question

    Speaking of getting residue inside you brass case. What is up with people adding things like car wax to their dry media? How does that not leave residue behind that would effect powder burn? Here I am worried about a tiny bit of imperial wax getting left behind in my case necks, but then there...
  18. 1

    Sizing Wax question

    FL sizing, I have a Redding bushing style die with the expander ball. It should be noted that I'm not putting the imperial case wax directly into the case neck, I will inevitably get a little around the opening which may or may not get into the case neck via the expander ball being shoved...
  19. 1

    Sizing Wax question

    Stupid question for you guys. I know with something like Hornady One Shot and other spray type lubes you are supposed to get some of the lube in the neck but is that the same for Imperial sizing wax? I'm curious to know if the wax will mess with the powder ignition, haven't been able to find...
  20. 1

    Should I upgrade my RCBS press?

    Hello everyone, I’m getting into PRS comps and I’m changing calibers to 6GT. My question is would it be a good idea to upgrade my reloading press as well? Currently I have my old RCBS, RC IV single stage press. I’m looking at ordering the new SAC Nexus press. Assuming my case prep process...
Top Bottom
Back
Home
Forums
Merch
Alerts