• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. 1

    Suppressors AAC 762-SDN6 POI Shift Issues

    Do you have the QD version with the 51 tooth flash hider or break? I have an 7.62-SDN6 QD, but i would never put it on a precision rifle hoping that it will be accurate. My SDN6 will always have a slight wiggle in it and even if I get a strap wrench an tighten it as much as I could, it would...
  2. 1

    .308 Win load development questions

    Ok so i went to the range with 15 rounds, 5 rounds loaded with 44.3gr, 5 of 44.5gr, and 5 with 44.7gr. 44.5 gr was the best giving me an SD of 7.8 with an average velocity of 2676fps. Should i go with this and start playing with seating depth or should i tweak the charge weight some more to try...
  3. 1

    Member Link Up Connecticut: is there anybody here with me?

    Hey everyone I just moved to Hebron, just became a member at Granby's range in Mass and was qualified on there 1000 yard range, that's a real nice place to shoot, I'm hoping to start on some PRS matches soon.
  4. 1

    .308 Win load development questions

    I'm using Varget, 175gr SMK, CCI BR primers. and federal brass
  5. 1

    .308 Win load development questions

    So I'm trying a different way in load development for my .308 win. I took my Magnetospeed to the range use that to look for velocity nodes. I started by firing 15 rounds starting at 42 grains and ending at 46.2 grains going up by .3 grains. Here is what I got. Charge weight (grains) MV...
  6. 1

    .338LM twist rate question

    Can a 1:10 twist stabilize a 300gr .338 round or would i have to use 250's? Thanks Josh
  7. 1

    Hensoldt spotter 60

    ^^^ that has divorce written all over it, BUT IT'S WORTH IT!!!!
  8. 1

    Suppressors Sas t.o.m.b?

    Does anyone here run an SAS Arbiter with the TOMB? Is the accuracy and repeatability as good as a direct thread version?
  9. 1

    Muzzle velocity question???

    Thats good to know. I will try that out on my .308. I just did a ladder test on two of my rifles at 350 yards, my 7mm has a node I will work off of that is clear as day, but my .308, not so much.
  10. 1

    Muzzle velocity question???

    So doing it this way you don't even need to put rounds on paper you just look at the velocities your getting from the magnetospeed and that correlates with the nodes in your barrel, am I getting that right? If this is true it would be a big help for me cause it is sometimes hard for me to find a...
  11. 1

    AR-10 ladder testing?

    I have been reloading for a while now on my bolt guns but I have never done a work up on an AR platform before, all I want to know is if there is any difference in load development with an AR compared to a bolt action, specifically the seating depth from the ogive.
  12. 1

    AR-10 ladder testing?

    I'm not sure yet I starting load development now
  13. 1

    Peterson Brass VS Lapua Brass

    well that answers my question, thanks i wish i saw that post before, now i feel dumb, thanks though
  14. 1

    Peterson Brass VS Lapua Brass

    I appreciate it
  15. 1

    AR-10 ladder testing?

    Ok so on a AR-10 platform how do you safely work up to a max pressure load without jamming the round on a ladder test? I have a 16" barrel on my rifle so I want to get as much speed out of my 175gr bullet as a can.
  16. 1

    Peterson Brass VS Lapua Brass

    Does anyone here reload with Peterson brass? I want to know how it compares to Lapua or Norma brass, is it junk? The reason I ask is because that it seems in .338LM it is about 2/3 the cost of Lapua brass on eurooptic, and even two boxes of 50 cases of Peterson .375 Cheytac would be cheaper than...
  17. 1

    AR-10 ladder testing?

    Here is a stupid question for you. If I'm doing a ladder test on my AR-10, do I start with the bullet seated .010" jammed into the rifling like I would with my bolt gun? Or would that cause malfunctions and not work?
  18. 1

    Muzzle velocity question???

    Sweet thanks guys, I'll be doing ladder testing on two of my rifles this weekend, hopefully.
  19. 1

    Muzzle velocity question???

    A couple quick question. when working up a load for a long range hunting/PRS rifle what is a good SD muzzle velocity to aim for. I would like to get zero but right now I'm getting around 15/16 SD according to my magnetospeed. 2) When preforming a ladder test how important is barrel temp? 3)...
  20. 1

    Trued R700 action VS. custom action?

    That true but I would send my action out to LRI, John Beanland or someone like that, I've heard nothing but good things about them and would trust there work.
Top Bottom
Back
Home
Forums
Merch
Alerts