• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. Powermac

    300WM case length

    Listen to Victors advice it is a good one. Having the correct brass length and knowing how long your chamber is, is worth the 5 $ for sure. It will at least reduce carbon ring buildup, as the closer the neck is the chambers neck the faster the brass will seal the chamber, and reduce any...
  2. Powermac

    Redding T7

    I would not worry too much, the T7 will do just fine for what you are looking for and is a quality press. There can be a bit of slop in it, but this can be fixed, do a search for it and you will find. Still it tends to produce good ammo, although adding a O-ring under your dies will likely...
  3. Powermac

    50 cal what would you buy what's your favorite

    AI or Mcm Tac 50
  4. Powermac

    Concentricity Gauge....

    If you want the best there is get the Accuracy one. For something more reasonably priced the 21 st century gauge is very good. The concentricity fixer is more of a gimmick. To move a seated bullet sideways, will definatly mess with your neck tension, possibly your seating depth, so you might as...
  5. Powermac

    Rifle Scopes Good deals on glass in Europe?

    The mentioned site has some good deals at times and a large selection. But as the dollar course has been the last few years your likely to find better deals in the US. Mil-optics.de is a good place to look if your looking for Hensoldt scopes, being the Main civilian vendor of these.
  6. Powermac

    300 Norma Mag die options?

    Frank is right the WTc die is a piece of art, also remember to buy several neck/shoulder inserts so you can adjust neck tension accordingly. And you can get a new body insert and neck/shoulder pieces to use it for several similar calibers if the price is hard to swallow. With the supplied...
  7. Powermac

    Choosing a new bullet for my 6.5 saum

    If your looking to get hold of bullets that are not exported to Canada, you can try reloading international. They Carry the JLK's amongst other. As for the new Scenar L's they lack a bit in Bc but the consistency is truly excellent. In that regard they pound the Bergers, for half the price...
  8. Powermac

    Comparator insert vs bullet jump question

    You pretty much answer your own question there , as long as there is a difference in the bullet skape/ ogive you will get different measurements. Adding or subtracting a few thousands will Only change where on the bullet the comparator makes contact. As for starting load development and...
  9. Powermac

    help with new reloading set up (new equipment)

    For a Electronic powder dispenser the Rcbs chargemaster is the way to go, add the straw mod and reprogram the dispenser speeds to get more consistent results. Will perform better then the competition. Best dies it really depends what you want to pary for. If you want the best dies possible...
  10. Powermac

    Looking for advice on a long range hunting rig from the reloading perspective

    I have a weakness for the 7's so i would personally have gone with a 7 RM between those two, the 300 will have a bit more energy and a bigger bore so it will most likely seem a bit more effective at the longer shots, but both will take elk out to considerate ranges using a good bullet, shot...
  11. Powermac

    Once fired brass to get shipped from US to AUS

    Reloading components, bullets brass, primers and powder is export controlled. Shotgun shells are not. What the exact rules and regulations are and where you find them, someone can probably answer I'm not from the US, and have never looked for them myself.. You need a personal export lisence...
  12. Powermac

    Once fired brass to get shipped from US to AUS

    Well it is not so easy as to just send it to you. If you want to export brass from the US legally, you will need a export permit, witch costs a couple hundred dollars and takes a time to get approved. So it's not just to press the buy button and wait for it to arrive, in general for small...
  13. Powermac

    Gunsmithing 375 Ultra magazine options

    A Long action DBM using 338 LM, or 338 LM CIP mags. Seekins or CDI for example can deliver you those. ANd the mags can be made to fit, might have to modify the feed lips a bit.
  14. Powermac

    Custom die, then different brass OK?

    If the choice is between those two i'd choose the Whidden FL bushing sizer, they are of good quality. If you do not use a expander in your die, you should seriously consider turning necks and get a expander die. Having all the neck inconsistencies, pushed to the inside of the neck by your...
  15. Powermac

    Who is using IMI brass in .308?

    IS it IMI regular or Match brass? Generally IMI brass is very strong and quality is decent. It is military brass though, so better suited for semis and autos then LR precision rifles, especially the standard version. The normal brass will have quite a bit thicker case walls compared to...
  16. Powermac

    Resize dimensions for custom FL sizer

    Can not directly help you with your answer, i am not a professional tool and die maker witch is who you want a answer from. Are you planning to make the die yourself or something? If not there is some very good options out there, i own some custom dies so have a bit of knowledge in that...
  17. Powermac

    Rifle Scopes Who makes this ring accessory?

    HAve no idea what exact model that is but there are similar types around. Spuhr makes a similar version to mount a Laser device, and i think they have one for the Hensoldt NV scopes. ERA TAC has similar attachment for they're mount although lower. Badger makes for they're rings. etc.
  18. Powermac

    Omega auto trickler help

    After the initial setup the Omega auto should reliably be able to finish the cycle without needing any attention yes. If you do fasten the bracket in a proper way to the scale or the bench, movement and re setup should not be a issue either. I suspect the bracket could be made heavier to begin...
  19. Powermac

    Omega auto trickler help

    You are corect the Omega trickler is meant to be used to trickle the last few kernels of powder. The updated models with the muzzle weight does trickle one single kernel quite eliably once you set it up right. Using the trickler to trickle close, and use yet another one for the last few kernels...
  20. Powermac

    338 Norma: What Action and who to build

    BAdger ordnance action, or if you want something really special a PGW Timberwolf.
Top Bottom
Back
Home
Forums
Merch
Alerts