Search results

Search the forum Search Articles
  1. R

    Best .22LR setup for under $1,000

    Re: Best .22LR setup for under $1,000 CZ 455: 399 on gunbroker Boyd's CZ 452 Stock: 92 from Boyd's DIP rail: 45 bucks Scope & Rings off another rifle that's with the 'smith right now..been paid for for years. The 452 stock will not fit the 455 without drilling two new action screw holes...
  2. R

    Gunsmithing Measuring Threads and Screws for Mark 4 Rings

    I have a set of Leupold 1" Mark 4 rings, no caliper and am not smart on how to measure threads...trying to figure out which replacement screws I should order from Brownell's. Screws are between 10 and 11 mm from the base to the bottom of the head, and 14mm overall. Can anybody help?
  3. R

    Best method of removing spray paint.

    Re: Best method of removing spray paint. Motsenbocker's spray paint remover, available at Lowe's or Home Depot. Makes the krylon flake right off.
  4. R

    Savage 10 pc vs. Remington 700 ltr

    Re: Savage 10 pc vs. Remington 700 ltr I can't tell you for sure if there are any higher QC standards for the LE rifles. I have never been able to get an answer on that. When I was at Drum, we had our M24's maintained by Remington...since we were only 90 minutes or so up the road we drove...
  5. R

    Fieldcraft saw grip

    Re: saw grip batteries, in a ziploc bag for your optics or laser, or any other small parts that are prone to breakage or loss
  6. R

    aftermarket stock for Marlin Glenfield 25.

    Re: aftermarket stock for Marlin Glenfield 25. HN7 did the tacticool work out for you on the Glenfield?
  7. R

    trainer

    Re: trainer What die do you use to open the case mouth up?
  8. R

    trainer

    Re: trainer Canuck 4570 Do you have any special procedures or equipment you use for bullet seating cast bullets in your 308? Can you just seat them like any jacketed bullet? Thanks
  9. R

    trainer

    Re: trainer How accurate? Are either of you using any kind of filler?
  10. R

    Factory Ammo vs Reloading

    Re: Factory Ammo vs Reloading If you have time to spare, but not money, handloading is worth it. If you have money to spare, but not time, then shoot factory ammo.
  11. R

    Colt Accurized Rifle (CR6724)

    Re: Colt Accurized Rifle (CR6724) Got it. That's what I needed to know. Thanks. How does the factory trigger on this gun differ from the regular AR trigger?
  12. R

    Colt Accurized Rifle (CR6724)

    Re: Colt Accurized Rifle (CR6724) I have one of these on the way...does it have any idiosyncrasies for fitting an aftermarket trigger...ie pin diameter or anything else out of the ordinary?
  13. R

    Gunsmithing Fire lapping

    Re: Fire lapping I used Final Finish on a Remington 788 6mm barrel, a 700 270 sporter barrel and the barrel on my LTR in 308. The barrels are easier to clean now...accuracy is the same.
  14. R

    ** PA - Looking for a 1000 yard to 1 mile range th

    Re: PA - RU lookin for a 1000 yard to 1 mile range I'm interested. Will send email in a minute.
  15. R

    .308 788?

    Re: .308 788? I learned to shoot, hunt and handload on a 788 in .243. I added a Canjar set trigger when I was 17 or so..it shot MOA or better with handloads. Boyds has aftermarket stocks for them. If you want to upgrade the stock, know that that even though .308 is generally known as a short...
  16. R

    Gunsmithing Intro and Savage Build questions

    Re: Intro and Savage Build questions Roger, I'll let them know I want a standard throat. Here's another question...can a gunsmith modify the throat later if I deem necessary?
  17. R

    Gunsmithing Intro and Savage Build questions

    Hello, been lurking here a while. I am active duty military, was a Scout / Sniper platoon leader in OIF 2 years ago, and graduate of Storm Mountain Sniper 1 and the GPS defense Warfighter Sniper course. I've been shooting my whole life, not an expert, but I know a couple things. I'm having a...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts