Search results

Search the forum Search Articles
  1. M

    Gunsmithing Muzzle engraving

    Re: Muzzle engraving I have done similar on muzzle brakes and suppressors but a barrel would be too long to fit in the cnc machine
  2. M

    Gunsmithing HELP!! Stuck Bolt!!

    Re: HELP!! Stuck Bolt!! My next guess would be to adjust the trigger so it's got maximum travel and see if that helps. Mine did a similar thing and it was because I had the trigger adjusted too sensitive
  3. M

    Gunsmithing HELP!! Stuck Bolt!!

    Re: HELP!! Stuck Bolt!! Sounds like your trigger could possibly be out of adjustment. Have you tried pulling the trigger while opening the bolt at the same time?
  4. M

    Gunsmithing Stainless Barrel coating.

    Re: Stainless Barrel coating. i use duracoat and blast everything with sand.. if you let duracoat cure properly it is tough stuff! i do all of my own personal rifles with it
  5. M

    Gunsmithing Vais muzzle brakes

    Re: Vais muzzle brakes here is one i just put on a customers gun
  6. M

    Gunsmithing Stainless Barrel coating.

    Re: Stainless Barrel coating. duracoat
  7. M

    Gunsmithing Vais muzzle brakes

    Re: Vais muzzle brakes 1+ on the vais brake they work great and they look good too
  8. M

    Gunsmithing Tikka action??

    Re: Tikka action?? i have put a few muzzle breaks on tikka's and everyone so far has a scary bend in the barrel..you can watch it as it spins between centers on a lathe.. but all of the one i have experience with still shot decent for a factory rifle
  9. M

    Member Link Up Long Distance Junkies

    Re: Long Distance Junkies i live in payson az and am definitely interested alone with a couple of close friends
  10. M

    Gunsmithing Opening up bolt face on Rem 700

    Re: Opening up bolt face on Rem 700 yes it can be done any qualified smith should have no problem taking care of it
  11. M

    Gunsmithing HALP!! I need a gunsmith's opinion!!!!

    Re: HALP!! I need a gunsmith's opinion!!!! i have done something like this as an experiment i threaded the one barrel like a muzzle break and threaded the inside of the extension i used the same barrel blank for both pieces of course and then i lapped the barrel while the two pieces were put...
  12. M

    Gunsmithing bell & carlson stock

    Re: bell & carlson stock the barrel channel is fairly easy to open up i use a milling machine and a ball endmill to open up barrel channels <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SoCalPete</div><div class="ubbcode-body"><div class="ubbcode-block"><div...
  13. M

    Suppressors 45 ammo question

    Re: 45 ammo question i have had excellent luck with corbon +p ammo and its way hot!!!! i cronographed some .45 165gr +p ammo at 1550 fps out of my 5 inch barreled 1911
  14. M

    Suppressors FN 45: Opinions please

    Re: FN 45: Opinions please The 45 is just as nice as the 9 and .40.. i have shot the crap out of mine and have yet to have a malfunction using factory ammo.. i absolutely love mine!!!!!
  15. M

    Suppressors Why did I get a 1911... ?

    Re: Why did I get a 1911... ? sorry about that i never noticed the rules i dont usually list stuff online... i have edited my last post
  16. M

    Suppressors Why did I get a 1911... ?

    Re: Why did I get a 1911... ? this is my colt i had built... colt 1991 completely custom!, slide to frame fit, E.G.W. angle bored bushing, E.G.W. two piece tungston guide rod, E.G.W. sear, ed brown safety, ed brown extended mag release, ed brown hammer, S.T.I beavertail grip safety, S.T.I...
  17. M

    Suppressors F.N. P40 holster

    i have been looking for a good holster for my f.n. p40 and having a hard time finding one.. if anyone knows of a place to get one it would be alot of help
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts