• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. insight3b

    Gunsmithing Anyway to fix a F'd up chambering job??

    If you don't want to remove the bbl you can use a pull through finish reamer like this: PTG Pull Through Finish Reamer 308 Winchester Bushing Drive Rod
  2. insight3b

    Hi Speed must have

    Made of aluminum?
  3. insight3b

    The foreseeable future of the 300 aac blackout?

    The only reason I would change would be if I decided to use a suppressor and actually wanted an AR to be quiet...other than that I'll just use my model 94 30/30 if I want slow moving 30 caliber projectiles out to 200yds as I don't see ANY advantage of a 300 BO if using it unsuppressed. I also...
  4. insight3b

    When not to prime

    Gave me a good laugh this morning. Thanks for that
  5. insight3b

    Tips for a guy thinking about Giraud

    You only need one cutter head. I would add a few blades to my order(each has 3 sides) I'm still on the second cutting blade of the original so they last a long time but better to have... The cutter heads are a cinch to adjust while still attached to the machine.
  6. insight3b

    How Does One Tune for Accuracy in an AR?

    This really helped my groups tighten and eased up the abuse on my brass: AR-15 Carrier Weight System - AR 15 PRODUCTS by Superior Shooting Systems For just a simple drop in part it works extremely well
  7. insight3b

    Gunsmithing What kind of paint do you use to fill in the writing on a ar lower?

    White and red Crayola crayons
  8. insight3b

    How many people turn necks?

    Its a Remington 700 issue but pertains to any rifle that has an ejector that works by pressing a plunger type ejector via 14-22 pounds of spring pressure on one side of the case head. You can have a trued up Remington 700 action and perfectly concentric ammunition and when you close the bolt...
  9. insight3b

    Gunsmithing Looking for a gunsmith thats installed an Ops Inc collar

    I would use ADCO I'm not affiliated but a good place to do business with: Shop/Machine Services at Adco Firearms ETA: sorry I didn't see where you already tried ADCO
  10. insight3b

    How many people turn necks?

    I don't do it because all I run is Remington 700's and the ejector puts so much pressure on one side of the case head that nothing is concentric even if it was perfect before you chambered it
  11. insight3b

    Lots of blemished bullets and brass in-stock

    LC 5.56mm pull down with intact primers: Lake City Pull-Down Reloading Brass 5.56x45mm NATO Primed Box of 500
  12. insight3b

    Lots of blemished bullets and brass in-stock

    308 1X fired brass in stock: Once-Fired Reloading Brass 308 Winchester Grade 3 Box of 250 (Bulk
  13. insight3b

    Need HELP: POI shifting throughout course of fire

    I would be more concerned with the optic at this point. After adjustment the POI doesn't shift=optics not tracking ETA: Unable to tell if your rings are aluminum. Have seen similar situation(and other unexplainable POI shifts 100 percent of the time) when aluminum rings are used and the optic...
  14. insight3b

    How many people turn necks?

    Used to then figured out it was an absolute waste of time
  15. insight3b

    MK262 clone 77Grain 5.56 load problems / updated OCW tests

    This helped me: AR-15 Carrier Weight System - AR 15 PRODUCTS by Superior Shooting Systems
  16. insight3b

    Midway has a good MK262 clone

    It is actual MK262 as loaded by Black Hills but in Colt packaging Colt Match Ammo 5.56x45mm NATO 77 Grain Sierra MatchKing Hollow Point
  17. insight3b

    Lots of blemished bullets and brass in-stock

    Primed Lake City 7.62X51(308) pull down brass: Lake City Pull-Down Reloading Brass 7.62x51mm NATO Primed Box of 100
  18. insight3b

    Gunsmithing gun action is crooked once its tight

    Sounds like the recoil lug is canted. If you remove the action from the stock and install the front screw in the receiver the screw head should be in alignment with the trigger group and the recoil lug should be flat. Here's one with a canted lug:
  19. insight3b

    Lots of blemished bullets and brass in-stock

    30 cal 178 grain match in stock: Blemished Bullets 30 Cal (308 Diameter) 178 Grain Hollow Point Boat
  20. insight3b

    165 vs 168 gr for .308

    If it doesn't say Match in the title then it is no good for target/distance shooting...not really but that seems to be the main-stream logic. Ironically the 165gr Sierra Game King HPBT can be used interchangeably for the loads I've developed in .308 and 30/06 with 168gr SMK's...probably because...
Top Bottom
Back
Home
Forums
Merch
Alerts