Search results
-
243 Win & 107 SMK with a 26" 1/9 bbl?
Re: 243 Win & 107 SMK with a 26" 1/9 bbl? DezHk, I have not been able to try the 105 A-Max yet. I was using a OAL of 2.710 with the 107 SMK and Winchester primers. I have not yet begun to play with seating depth. At 44.2 and 44.5 grains the bolt lift was getting sticky. I was shooting...- TP4
- Post #10
- Forum: Reloading Depot
-
243 Win & 107 SMK with a 26" 1/9 bbl?
Re: 243 Win & 107 SMK with a 26" 1/9 bbl? DezHK, Here are the crono averages for the RL 22 & 107 SMK. 26"bbl 1/9 twist. 43.5 gr 2,903 fps 43.8 gr 2,922 44.0 gr 2,965 44.2 gr 2,993 44.5 gr 3,006- TP4
- Post #7
- Forum: Reloading Depot
-
243 Win & 107 SMK with a 26" 1/9 bbl?
Re: 243 Win & 107 SMK with a 26" 1/9 bbl? DezHk, I finally got the Rem 700, 26" 1/9 twist bbl to the range today. No problems stabilizing the SMK 107 gr projectiles. With RL 22 and a COAL of 2.710 I started at 42.5 grains and worked up to 44 gr. No keyholing, even at 42.5 gr. I had...- TP4
- Post #5
- Forum: Reloading Depot
-
Reloading for .338 Lapua
Re: Reloading for .338 Lapua <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body"> Lapua brass at $2.20 divided by 10 loadings= $.22 Retumbo @ $24.00 divided by 70 loads = $.34 bullets @ $.60 primer @ $.04 figures about a buck twenny to me My Forster...- TP4
- Post #19
- Forum: Reloading Depot
-
AICS Stocks?
Re: AICS Stocks? I just shot a custom 338LM in an AICS 2.0 last week and it was very nice. I didn't think I would like the thumbhole but, it was really comfortable. I liked it so much I purchased a AICS 2.0 SA for my 243 build yesterday from Adam at Bauer Arms. Great people to deal with...- TP4
- Post #6
- Forum: Bolt Action Rifles
-
APA Surgeon 7WSM w/Seekins WSM DBM, *Range Report*
Re: APA Surgeon 7WSM w/Seekins WSM DBM...DONE!!! Were you out with Randall and the guys at Angeles? Will the staff let you all run out to 200 to print on paper while the range is open to the public? Very nice build. I am gearing up to do a 7mm SAUM build.- TP4
- Post #60
- Forum: Bolt Action Rifles
-
Reloading for .338 Lapua
Re: Reloading for .338 Lapua I use the standard Redding 3 die set. Lapua brass, Federal 215 GM, 90gr VV N170 and 300gr SMK. I have shot many sub-MOA groups at 1000 yards with this combo. The rifle is a stock AR 30. You will not be sorry doing a build in 338 LM. Its a real hoot!- TP4
- Post #17
- Forum: Reloading Depot
-
.243 Winchester loads
Re: .243 Winchester loads Fuzzy, whats the length/twist on that bbl?- TP4
- Post #22
- Forum: Reloading Depot
-
243 Win & 107 SMK with a 26" 1/9 bbl?
Re: 243 Win & 107 SMK with a 26" 1/9 bbl? DezHK, thanks for the input. Yeah, Rem lists the bbl as 9 1/8 twist. I have read that a lot of guys are using RL 25. I have some N170 I could try. This is the only data I could find for RL 22. <div class="ubbcode-block"><div...- TP4
- Post #3
- Forum: Reloading Depot
-
243 Win & 107 SMK with a 26" 1/9 bbl?
243 noob here. I am working up some loads for a new Rem 700 in .243 Win, with a 26" 1/9 twist barrel. I'm using 107gr SMK and Reloder 22. I started at 42gr and worked up to 44 gr in three grain increments. Anybody have any experience with this projectile and barrel length/twist? I figure...- TP4
- Thread
- Replies: 10
- Forum: Reloading Depot
-
What is the best best powder for 338 lapua 300 gr?
Re: What is the best best powder for 338 lapua 300 gr? I use 90gr of VV N170, 300gr SMK, GM215M primer and Lapua brass in my AR30.- TP4
- Post #15
- Forum: Reloading Depot
