Search results

  1. C

    Affordable Tripod + head

    The Night Googles Pro tripod looks a lot like the 2 Vets Tripods.
  2. C

    Reloader 23, 190 SMK's and .300WM

    Alrighty then. Here's the next report. I went to the range armed with my test loads. Ten rounds each 74.5, 74.6, 74.7, and 74.8 grains of RL23. COAL is my standard 3.470 with the 190 SMK. 74.5 74.6 74.7 74.8 Average 3115 3138 3146 3153 SD 14 8 8 6 ES 44 28 26 21...
  3. C

    Are the FN SPR enthusiasts extinct?

    Thanks. That probably explains some of the weirdness with other bullet weights.
  4. C

    Are the FN SPR enthusiasts extinct?

    Are all SPR's 1/12 twist? I was under the impression most were 1/11. Mine does really well with 175 SMK's
  5. C

    Reloader 23, 190 SMK's and .300WM

    Ok. I went out today to work on my own problem. This is what I started with. I volume checked the cases. All once fired Federal from this rifle. The cases were sized and trimmed before they where checked. Filled to the shoulder/neck joint 82.88 gr avg. (H20). CCI 250 primers, 190 SMK's...
  6. C

    .308 Winchester

    My favorite; FN SPR, 1/11 24inch factory barrel 175 SMK 43.5 IMR 4064 Federal 210 LC NM 64 OAL 2.810 2726 fps .32 MOA @ 100 yards.
  7. C

    Reloader 23, 190 SMK's and .300WM

    @jet_lagged My velocity are coming from a Magnetospeed as well. Like you, I'm not sure how much I trust it. The last time I checked against my buddy's conventional chronograph I was about 20-30 fps higher.
  8. C

    Reloader 23, 190 SMK's and .300WM

    @Dogtown That's a lot of data. Thanks for the research. That's a pretty good schedule to start working on. It is a faster powder than H1000 and seems to hit higher pressures pretty early. It makes me wonder about that 75.5 max load Alliant published.
  9. C

    Reloader 23, 190 SMK's and .300WM

    I've been lurking on the forum for years and this is probably my 3rd post. Due to the reloading supplies fiasco and trading, I wound up with a 8 pounder for RL 23 and around 1,200 190 SMK's. My go to for 300 WM is, like everyone else, H1000. I've been looking for data for the RL23 but haven't...
  10. C

    Reloading Equipment WTS: .300 WM brass

    Are the 300 WM dies still available?