Search results

Search the forum Search Articles
  1. 1

    Member Link Up West central Ohio

    Anybody here? We need to meet up. Not to shoot but to establish some comms. They are on a blitz shutting down social media.
  2. 1

    6.5 Creedmoor

    Anybody shoot this or know anything about it?
  3. 1

    Attention Shoppers. Here is where to NOT buy your coffee LINKS TO VOLCANIC COFFEE NOW IN THREAD Stay tuned for some TheGerman related coffee offerings

  4. 1

    Headspace issue....

    I spun the shell holder in the lathe and took a couple .002-.004 off. Will update....
  5. 1

    6.5 Creedmoor

    Groups on both sides of 40.9 look good.
  6. 1

    Headspace issue....

    Using what I have I can compare cases but I cant compare to other peoples brass
  7. 1

    Headspace issue....

    Its a home made CBTO comparitor insert I was using for my 338. So the bore is probably around .336
  8. 1

    Headspace issue....

    No. Because I'm not measuring on the .400 datum line.
  9. 1

    Headspace issue....

    I can anneal. Does everybody do that every firing?
  10. 1

    Headspace issue....

    I cant run the down farther. Its as far as it goes. On the hornady single stage press it has a "cam over" so at the top of the stroke before it drops back down slightly the bump against the die is pretty stout. Thats why I thought about taking .002 off the top of the shell holder because I cant...
  11. 1

    Headspace issue....

    The die is a full length RCBS die set up the way the manual says. Run the die down till it touches the top of the shell holder. I have not annealed this brass. It is on it 3rd firing I think. The lube is Hornady One Shot
  12. 1

    Headspace issue....

    Hornady One shot. Feels good. No drag. idk? Whats the tolerance for headspace? Does it really matter if I bump the shoulder .004?
  13. 1

    Headspace issue....

    One shot spray
  14. 1

    Headspace issue....

    I do not anneal every firing. And yes thats what it seems like is happening, especially since this brass is still being used for load development so the charges and pressures arent the same
  15. 1

    Headspace issue....

    I think. 6.5CM. A new case is my "zero". A fired case is only .002 bigger than the brand new case. A fired, sized case is only .001 bigger than a brand new case and .001 smaller then a fired case. Sounds sweet right? Until I get 1 out of 3 that are hard to chamber. Would it fix the problem if I...
  16. 1

    Are conservative values destined to lose out?

    We all know how this ends. Prepare.
  17. 1

    Rifle Scopes Direct mount/unimount

    I have a 20MOA NF direct mount on my 700SA. Does anybody make something like this in 30 or 40MOA?
  18. 1

    6.5 Creedmoor

    I thought about a hand press so I could turn the round upside down
  19. 1

    6.5 Creedmoor

    I cant get that much in the case. Where does the base of the bullet sit in your case? How far can I stretch the bullet out of the neck?
  20. 1

    Has anyone used A-Tips in 6.5CM yet?

    At 40ish gr of extruded powder the level of the powder in my cases (6.5CM) is at the base of the shoulder. If I seat the bullet far enough in the case to get a whole neck worth of bullet in the neck the base of the bullet is at the base of the shoulder. How are you guys fitting 42+gr of powder...
Top Bottom
Back
Home
Forums
Merch
Alerts