Search results

Search the forum Search Articles
  1. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    Morgan, do you ever see matches/stages with unknown distances?
  2. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    I’ve added a picture below from Applied Ballistics to hopefully give you a better understanding. For the particular bullet being profiled, the trajectory “occupies the height of the target from 579 yards to 620 yards. This means that the 10” target is in the danger space of the trajectory for 41...
  3. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    So I just ran them in JBM using same as I did in Ballistics AE (Hornady 108gr vs 140gr ELDM) and you are correct, 6mm better out to 1000yds. Sorry for any confusion 👍🏻
  4. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    Okay, thx. I will check it out. I used the Ballistics AE App.
  5. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    Okay, thanks for double-checking my work. I certainly don’t want to mislead anyone. I used the formula that Litz gave in AB book (zeroed at each 100 yd mark, set max range for 100 yds past zero and calculated using 1yd increments). Based it on a 10” target and looked at 5” drop in front of and...
  6. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    Appreciate the response Morgan
  7. RAWHDE

    Range Report Danger Space Comparison 6mm vs 6.5mm

    I know most of the top guys in PRS/NRL are shooting 6mm so I was curious how it stacked up against the 6.5cm when it came to danger space (DS). I ran calculations for both rounds (Hornady 108gr ELDM & Hornady 140gr ELDM) on ballistics calculator and checked DS at various distances. If I did not...
  8. RAWHDE

    Bullet pushed back into casing

    Aaron Roberts...very good.
  9. RAWHDE

    Bullet pushed back into casing

    Just got back from my gunsmith and figured out the issue. Two-fold actually. First thing is he checked the headspace and it was perfect. Not sure if this is an old gunsmith’s trick or not but he put spacer in, closed the bolt and it dropped in perfect...he then put a piece of scotch tape on...
  10. RAWHDE

    Bullet pushed back into casing

    That’s a generous offer, thanks
  11. RAWHDE

    Bullet pushed back into casing

    AI is next on my list
  12. RAWHDE

    Bullet pushed back into casing

    Not on the bullet, no
  13. RAWHDE

    Bullet pushed back into casing

    Taking it back to the smith tomorrow and letting him look at it. Let you know what he finds. Thanks for all the responses.
  14. RAWHDE

    Bullet pushed back into casing

    Can definitely see it with the naked eye
  15. RAWHDE

    Bullet pushed back into casing

    No hand loads but thx
  16. RAWHDE

    Bullet pushed back into casing

    Thanks fellas, I will check for markings when I get home today. If not, will ask my smith about binder plate plus... I am going to be surprised if the chamber is cut improperly, the smith I used is very reputable in Houston area.
  17. RAWHDE

    Optics SOLD - SWFA SS 10x42 (Mil-dot reticle)

    Send a pm, thx
  18. RAWHDE

    Optics SOLD - SWFA SS 10x42 (Mil-dot reticle)

    Send me a pm
  19. RAWHDE

    Bullet pushed back into casing

    I am waiting on scope for new build and was tweaking the mag well adjustment and sear on JAE700 to get everything as smooth as possible. I loaded up a few rounds in AICS mag and chambered a couple times but found that after ejecting, a couple of the bullets were pushed back into the casing a...
  20. RAWHDE

    Optics SOLD - SWFA SS 10x42 (Mil-dot reticle)

    Bump
Top Bottom
Back
Home
Forums
Merch
Alerts