Search results

  1. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    I think the only difference is that it’s an mlok rail
  2. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Yes; the only Mod is that I put a PRS on it.
  3. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    My load was; hornady brass trimmed to 1.910, 43.0 grains of H4350 Br-2 primers, oal of 2.8; but grew to 2.815 by the end to chase the lands (they say the ELD is best with a .055 jump). I averaged 2811fps with 6 SD and 13 ES; up until somewhere over the 3300 mark when she gave out of me in which...
  4. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    It was a 6.5 creed; it died on me during a match at about 3300 rounds. 300 factory ELDs, 800 140 RDFs over 43.0 grains of 4350, and 2200 of 140 ELDs over the same.
  5. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Mine did until It died on me. But was 1/2 moa or better for the majority of its life
  6. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Meh; I run my 20” 308, and 20” 223 out to 1k without much trouble. The extra 40fps isn’t worth 6”
  7. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Lol sorry; I tend to get a little carried away at times. You could look into the carbon fiber barrels, a skeleton or lighter stock, maybe a light weight bolt shroud, rings, scope and a light weight handguard. That’s really about the only way to put her on a diet that I can think of.
  8. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    I know a few gun smiths who would argue with that. Velocity doesn't equal accuracy. Some would argue that the longer barrels 26+ flex more and are not as ridged as a shorter barrel, which may cause inconsistencies.
  9. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Both scopes are Sig Tango4 6x24. The black one is on the creed; which needs rebarreled. Just picked up they 556 but haven’t had the chance to do much with it yet. I have another magpul that will be going on it.
  10. PhOnEpHrEaK

    Rifle Scopes Tango Down!

    Well, it seems my Tango4 bit the dust on me yesterday. I put it on a new rifle and attempted to zero it only the find that the zerostop is frozen (probably my fault to be honest). Anyone have any experience with Sig’s customer service? Looks like I’ll be testing out that warranty of theirs.
  11. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Handloads yes; Havent shot factory under 60, but another guy's rpr was running that at my last match it was 30-35 that day
  12. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    2740-2750ish with factory.. 2820 with handloads
  13. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Let’s say I ordered a barrel today. Would I have it by April 14?
  14. PhOnEpHrEaK

    Dthomas3523 is good to go

    Dthomas3523 is good to go. excellent to work with, very clear communication; flawless process.
  15. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Any idea how long it takes LRI to get their 6.5 rpr barrels shipped?
  16. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Unless you're packing mud into the barrel, it shouldn't be too difficult.
  17. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    I think I clean every 600-700 rounds; that’s just a wet patch or two than 2-3 passes with dry patches. I keep a snake on me during matches or hunting Incase something gets in the muzzle. Otherwise I don’t clean. Listen to Frank. He’s a wise man.
  18. PhOnEpHrEaK

    bolt 6.5 creedmoor barrel life?

    My rifle died on me yesterday. 3350 rounds.. one stage I was on it went 10/10. Then went 10/70 on the next 7 ages. Got home and it stillborn bugholes at 100; but at distance it’s all over the place.
  19. PhOnEpHrEaK

    bolt 6.5 creedmoor barrel life?

    I would agree with that for sure. At this point I am having to load a little bit longer to chase the lands and get some of that velocity back. But I haven’t really noticed a performance drop off yet. The last match had me wondering though, I dropped I couple shots that I felt like should have...