Search results

Search the forum Search Articles
  1. C

    gap semi 308 piercing primers

    Re: gap semi 308 piercing primers *firing pin hole that is what i meant to say.
  2. C

    gap semi 308 piercing primers

    Re: gap semi 308 piercing primers I had this problem once, it turned out that the firing pin channel/recess at the bolt face was too large and did not support the primer properly. you will end up with primer frags either wrapped around the tip of your firing pin causing slam fires or bound...
  3. C

    AnzioIronworks.

    Re: AnzioIronworks. they use lothar walther barrels, and guarantee .5 moa with match ammo on the light .50's.
  4. C

    AnzioIronworks.

    Re: AnzioIronworks. Its VERY fun to shoot.
  5. C

    Rifle Scopes Is this too close to the barrel?

    Re: Is this too close to the barrel? graham rocks the house with the setup he has pictured, really if you want to know what works refer to that pic and try to be more like graham.
  6. C

    Trying to find a dealer for Saiga 12 Taktika

    Re: Trying to find a dealer for Saiga 12 Taktika im pretty sure you have to do the conversion yourself on that one with at least 3 (i think) US parts. i dont think they can be imported in that configuration. there are a couple guys out there doing magwells for saiga 12s.
  7. C

    Another 7.62 AR decision

    Re: Another 7.62 AR decision My Noveske Ar10 has gone 340 rounds suppressed without cleaning, and without malfunction.
  8. C

    Range Report short distance dope

    Re: short distance dope whats up bottles! Rob is right on the money with scope height. scope height is key for this one be sure to carefully measure from the center of scope to center of barrel/chamber if you want those ballistic programs to work for close dope. you making the bash this year...
  9. C

    Rifle Scopes 40 moa base

    Re: 40 moa base A 0 Moa base easily gets my NF 3.5-15NXS to 1K on my ar10 with factory ammo.
  10. C

    Workplace shooting. 9 dead. .223 rifle used

    Re: Workplace shooting. 9 dead. HANDGUN used even the link you posted says handgun...change your subject.
  11. C

    Anyone else using Vibram Five Fingers?

    Re: Anyone else using Vibram Five Fingers? +1 on the smell..i love mine but going on a couple years worth of running working out etc.. regular washing just doesnt do it anymore. They have to be soaked in a vinegar solution over night to get the overpowering stench out. really i think im to...
  12. C

    Advanced Marksmanship Harris Bipod and Recoil

    Re: Harris Bipod and Recoil Tame the HOP! <object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/Xr4uvCJLmFU"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/Xr4uvCJLmFU" type="application/x-shockwave-flash"...
  13. C

    Photos Delta P Design Brevis .223 Suppressor

    Re: Delta P Design Brevis .223 Suppressor hows that .30 cal can sound?
  14. C

    wind meter app. for I-Phone

    Re: wind meter app. for I-Phone i emailed knights about this maybe 6 months ago and they told me that they have been looking into it, but the i-phone currently would not support streaming data like that over blue tooth only audio...didnt make sense to me, audio is data.
  15. C

    Pics of where you shoot

    Re: Pics of where you shoot
  16. C

    ar trigger

    Re: ar trigger I don't think you could be dissatisfied with a properly tuned geiselle high speed trigger. its pricey but, worth the money.
  17. C

    Best .308 stripped upper?

    Re: Best .308 stripped upper? Axeman, if you are happy with the performance of your dpms let it be, if not Iron Ridge uses a delrin tipped set screw to allow the end user to tighten the fit between the upper and lower. The set screw is accessible by removing the pistol grip. If it were me i'd...
  18. C

    AR and unusual problem

    Re: AR and unusual problem i had this problem with an ar 10 once, i didn't spend a lot of time trouble shooting it, but i did notice the upper/lower fit was pretty loose. i ended up with a very tight fitting lower and the problem disappeared. also, as far as the method of loading the first...
  19. C

    bridging the gap...

    Re: bridging the gap... I'd be interested!
  20. C

    Suppressors New to silencer (Unique?) question ... HELP!

    Re: New to silencer (Unique?) question ... HELP! I've had this problem before, you are probably right at the edge of your pressure limit without the can and are being pushed over with the added back pressure induced by the can. you probably ought to back off it a little, i dont know what you...
Top Bottom
Back
Home
Forums
Merch
Alerts