Search results

Search the forum Search Articles
  1. CoryT

    Night Vision Custom USB power supply options for Thermal and NV

    I literally had been designing one of these in my head for a while now for my UANVB-katana’s but I’m thinking because the battery cap itself (the surefire clone) is the on/off button, there would need to be an additional on/off switch added into the cable somewhere along the way back to the...
  2. CoryT

    Hard Bolt Close for Shorter OAL

    .001 is most certainly not enough. .002 to .003 is standard. Case length may also be an issue, it's possible, though unlikely that the case needs trimming to length. When setting the sizing die, best thing to do is strip the bolt of firing pin and ejector, then see that a sized case lets the...
  3. CoryT

    Night Vision Safran TAD

    Well, the test unit I had here clipped in to my E-COTI mount just fine.
  4. CoryT

    Hush Holsters ? For silenced pistols

    I'm testing one out with an M&P45, Surefire X400V and Ti-Rant 45. I had to fabricate a mount plate to get it where I wanted on the war belt, but that's just my G-Code setup. It has a little wobble, and reholstering takes a little technique, but even with the wobble it seems pretty secuve. The...
  5. CoryT

    Reloading Equipment FS:Complete Hornady 50BMG loading system with brass and bullets

    Make it $1200. I should note that it has the Inline Fabrication roller handle and QD mount plate.
  6. CoryT

    Night Vision Helmet Mounted Dual Thermals

    The challenge with dual thermal is seeing shadow and contours. It's OK if you are just scanning in a fixed position, but movement can be quite a bit more challenging than movement under I2. Can you? Yes. Should you? I advise against it in my classes. For thermal target detection while...
  7. CoryT

    Reloading Equipment FS:Complete Hornady 50BMG loading system with brass and bullets

    Not a problem, if you need anything else, just ask.
  8. CoryT

    Reloading Equipment FS:Complete Hornady 50BMG loading system with brass and bullets

    bump, still available, along with some match Hornady A Max and additional cases if desired.
  9. CoryT

    Accessories STORM AN/PSQ-23A for sale

    I do not, I have seen them appear from time to time on EBay, Venture Surplus had some, but they are not common.
  10. CoryT

    "Zeroing" laser rangefinders

    Divergence is normally a pretty tight spec, if it falls far outside then the unit will not perform as advertised. Remember, the Vector IV is more than 20 years old, and it has a 1550nm laser. That uses MUCH more power than a typical 900nm commercial unit. You need about 50% of the beam on...
  11. CoryT

    "Zeroing" laser rangefinders

    Normally you can get the beam dimensions from the mfg. At 100 yards, take a sheet of cardboard and cut some holes to a bit over the beam size. For example, the Vector IV is 2 mil x 2mil, so cut a 7.5" square opening. if you center the reticle on that, you should range the target beyond it...
  12. CoryT

    SD's

    Then you need a class in statistics. Standard deviation will tell you the expected spread, 98+ % of rounds fired will be within +/- 3 SD's of the mean. ES is more or less useless. Fire 5 rounds and take the ES, how many data points is that? 2. Fire 100 rounds and take the ES, how many data...
  13. CoryT

    Reloading Equipment FS:Complete Hornady 50BMG loading system with brass and bullets

    Getting out of 50BMG, so I have a complete Hornady reloading kit along with brass and bullets available. Press, sizer, seater, priming ram, additional lock-n-load bushings, 500 once fired cases, 200 M33 ball projectiles and 50 AP projectiles. If you are in AZ and/or can pickup at Gunsite...
  14. CoryT

    Primer Pocket Crimp Removal Tools

    I'm using the Burstfire in a Frankford case trimmer station, seems to work fine.
  15. CoryT

    Night Vision Safran TAD

    Just a holder. I made it up for a guy on here that sourced 20x1 mm germanium windows, I can find out where he got them.
  16. CoryT

    Night Vision Safran TAD

    I do have a holder for a sacrificial lens if that's something you need.
  17. CoryT

    Ammo FS: Hornady 50 BMG 750gr AMAX match SOLD

    Roger that, I've got a prior commitment for 1 case, but I think I can still do 14 for you. I'll know in the AM when I can get back in the connex. I'll need a shipping address to get a UPS quote, I presume full insurance
  18. CoryT

    Ammo FS: Hornady 50 BMG 750gr AMAX match SOLD

    Let's move this out at wholesale, $600 per case plus shipping.
  19. CoryT

    Ammo FS: Hornady 50 BMG 750gr AMAX match SOLD

    bump
  20. CoryT

    Ammo FS: Hornady 338 LM Match 285gr BTHP

    8 cases of Hornady 285gr BTHP 338LM match available, 200 rounds/10 boxes to a case, $650 per case. Buyer pays UPS shipping charges. Cory Trapp Gunsite Academy, Inc.
Top Bottom
Back
Home
Forums
Merch
Alerts