Search results

Search the forum Search Articles
  1. S

    Please read. The winner is....

    Paypal sent for 2, praying for Branden and Nicole, thanks for everyone doing this. This is the reason this is the greatest group of guys I know.
  2. S

    My POS cobble-together budget Salvage is complete!

    Is it feeding good from those ai mags? I have been contemplating the 223ai vs normal. I think you made my mind up haha.
  3. S

    Beanland 260. (Fastest barrel I've ever ran?)

    I was 2860 with a 23" barrel and 140 amax. I was 3020 with 130vlds was an exceptionally fast benchmark barrel. Shot pretty well but very fast.
  4. S

    2014 GAP GRIND/BUSHNELL PRO/AM hosted by K&M PRT (29-31 August)

    I will have no chance of signing up on 29 May. I will be out of the states.
  5. S

    Texas man hits 1 MOA target at 2.07 miles

    The weather in Raton, NM right now is. 50* 44% HUM 6709 ALT 0.0 MPH wind out of SE 29.97 Baro
  6. S

    2014 GAP GRIND/BUSHNELL PRO/AM hosted by K&M PRT (29-31 August)

    Do we determine our team? I also dont know exactly where I fall as a pro or am.
  7. S

    Missouri MRMBC match announcement

    Brian, I want to thank you for the awesome match that you put on this weekend as well as thanking your wife, in-laws and family. This match was an awesome display of humbleness, graciousness, and most important comradery. The winner was gracious in his prize picking as a winner usually never...
  8. S

    The NIGHTFORCE 2014 Steel City Precision Rifle Challenge- Birmingham, AL

    Im assuming plenty of spots left. I sent a pm about match details.
  9. S

    Savage conversion to 6.5 SAUM

    I had a wsm action i was going to use as a donor setup for a 7 wsm/saum build. Well i found someone selling a low round count factory lrp barrel so i bought it and reamed it out to the saum. Im in the market for brass and dies. Once i get those items i have 140 jlk, 14x cretacious and 140 amax...
  10. S

    Accurate Ordnance 6.5x47

    Where are you at in W.KY?
  11. S

    6 creedmoor, mega and Baldwin Gunworks deadly accurate.

    In the AR10 platform the .243 is to long of a cartridge. The 6 creed is a shorter casing which allows for good seating length in the semi platform where length is limited. Brass can be bought from G.A. precision so no it doesnt need any forming or extra work.
  12. S

    IMR's XBR8208 in an AR10

    Same here, in my 14.7" pinned .308 it runs very well with 178 amax's.
  13. S

    6 creedmoor, mega and Baldwin Gunworks deadly accurate.

    Yes i am, they are right around 3060.
  14. S

    6 creedmoor, mega and Baldwin Gunworks deadly accurate.

    This thing is getting better and better. I shot 3 1/2" group today with no wind at 787. Then moved to a 558 yard plate and drilled it with ease printing around a 2 1/4" group. If you dont know about Bart Baldwin at Baldwin gunworks check him out on facebook. I couldnt imagine this rifle with a...
  15. S

    Bullet tipping or pointing

    I use a whidden and Ive yet to sit down and test accuracy of both setups. But I did pick up .3 mil to 1k with my .260 and 130's.
  16. S

    DPMS LR260 suggestions.

    Not sure I would use the final finish on a used and fired weapon. Are you planning on running suppressed or just like a adj gas block? The other stuff is your option, I dont run a shelf grip I like a normal pistol grip like an ergo or something of the likes. Muzzle brakes I know a guy that...
  17. S

    6 creedmoor, mega and Baldwin Gunworks deadly accurate.

    Well after a few weekends of shooting and a few other days of shooting. Things were changing with the rifle, load was speeding up as the barrel was warming up. I knocked the charge down and Im basically at the same point I was at with a hotter load. So in the midst of the load development I shot...
  18. S

    Gunsmithing Indicating Rods, Ranging Rods and Grizzly Rods

    Guess thats what im getting at, making sure your concentric when chambering. Guessing the wording i used was incorrect. Where the rod is allows you to make sure its running true not so much caring about the muzzle end.
  19. S

    Gunsmithing Indicating Rods, Ranging Rods and Grizzly Rods

    How do you make sure that the muzzle end is running true. I know with rods you measure close to the barrel and towards the end of the rod. Ive been toying the idea around about picking up a lathe for some hobby work. So im trying to weigh options etc. I like the SSG true bore setup.
  20. S

    Gunsmithing Indicating Rods, Ranging Rods and Grizzly Rods

    How do you use a long reach on a bore that has lands and grooves?
Top Bottom
Back
Home
Forums
Merch
Alerts