Search results

Search the forum Search Articles
  1. 3

    Starting Load for a Short M1A/M14 ??

    Re: Starting Load for a Short M1A/M14 ?? I would start with W748. As for load suggestions I don't have any as I've never dealt with a 308 with that short of a barrel.
  2. 3

    Owning multiple rifles in the same cal?

    Re: Owning multiple rifles in the same cal? If you already have a rifle in 300WM I wouldn't by the 300WSM. It seems like you have most of your bases covered with the rifles you have. Any thoughts on doing something ultra long range?
  3. 3

    A hell of a time with OAL!

    Re: A hell of a time with OAL! <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body"> I just measured 10 bullets and they were all within 5 thou of each other. If YOUR bullets OAL vary 40 thou, what kind of bullets are you...
  4. 3

    A hell of a time with OAL!

    Re: A hell of a time with OAL! If you're pretty sure that it's neck tension doing this, here's something to try. Measure your all of your bullet lengths (from base to tip) and write these measurements down. Find 5-10 that are EXACTLY the same length and use them to load up any of the cases...
  5. 3

    Gunsmithing Recommended cleaning/ lube for a Jewell?

    Re: Recommended cleaning/ lube for a Hewell? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SpotcheckBilly</div><div class="ubbcode-body">I've always used cigarette lighter fluid (Ronsonol) to clean my Jewell triggers because it's Naptha-based and refined to a...
  6. 3

    Best 700 trigger for the buck

    Re: Best 700 trigger for the buck Rifle Basix works great and if you're willing to do a little work, the X-Mark trigger is a good second choice.
  7. 3

    New lapua brass dented...

    Re: New lapua brass dented... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jeffvn</div><div class="ubbcode-body">I use the Sinclair expander, but anyone's will do. JeffVN </div></div> +1
  8. 3

    Jumping Berger 155 VLDs?

    Re: Jumping Berger 155 VLDs? They probably won't work well with that much jump. Most of the time Berger VLD's like to be right at or into the lands. Not always, but most of the time. The only way to know is to test them out.
  9. 3

    About to buy reloading equipment...

    Re: About to buy reloading equipment... The kit you're thinking about is fine, and it won't break your budget.
  10. 3

    Press for 338 lapua

    Re: Press for 338 lapua I load for the 338 LM on a Hornady LNL single stage press. It works great. The only complaint that I have is that you have to angle the round to get it in the shellholder. Other than that, the press produces good ammo.
  11. 3

    Where can I get 338 LM Remington brass?

    Wanted to try it out, does anyone know where I can get it?
  12. 3

    Who uses Moly?

    Re: Who uses Moly? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DRAM40A1</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">I use Boron Nitride, its a better lube...
  13. 3

    Modified case will not work

    Re: Modified case will not work <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: suasponte</div><div class="ubbcode-body">The Modified case from Stoney Pointe have inside neck ID's that are normally larger than the madrels on your neck turner. This does not allow...
  14. 3

    338Lapua Magnum - Barnes Bullets

    Re: 338Lapua Magnum - Barnes Bullets <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">I'd imagine those 160's will be a laser beam between 100 and 300 yards, make sure to post pics of the carnage!! </div></div> I'd like to see...
  15. 3

    Modified case will not work

    Re: Modified case will not work <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: macv</div><div class="ubbcode-body">Hello,today I finally got started (with the very nice weather)to start thinking about reloading for a rifle that was put together through the winter...
  16. 3

    Who uses Moly?

    Re: Who uses Moly? Shaneous69: If you keep all components and settings the exact same when switching over to moly then my experience says anywhere from .5 to 1.5 grains over is needed. To find out how much more is needed you should have a good chronograph. Chrono's are really the only...
  17. 3

    neck sizer die....important?

    Re: neck sizer die....important? Sounds like your vendor got his wires crossed. The best way to go if you reuse the same brass in that one rifle is to use the neck sizer. The neck sizer will only size the neck of the case and leaves the rest of the case alone. This is good for accuracy...
  18. 3

    Best .308 factory match ammo

    Re: Best .308 factory match ammo FedGM hands down is the for me followed by Hornady match.
  19. 3

    A which rifle question

    Re: A which rifle question I'd hold each rifle in several different shooting positions. Then pick the one that feels the best overall.
  20. 3

    What Dies for my 300win mag

    Re: What Dies for my 300win mag I've used both companies you mentioned and I have to say the Redding dies are the best. I've had severe consistency problems using Lee stuff and never a problem (knock on wood) using Redding. Anyways, just my 2 cents.
Top Bottom
Back
Home
Forums
Merch
Alerts