Search results

Search the forum Search Articles
  1. jasonfaz

    Suppressed Arma-Lite 338 Federal Project

    Right on brother. You're tracking exactly as I did with the same loads. From a factory ammo perspective, the 200 grn Trophy Coppers were sub .4 MOA at a bill. The 210 TSX were even more accurate on avg. Good shooting my man!
  2. jasonfaz

    6.5 creedmoor SPR Build

    Nice shooting. Might some of our homeboys buy a heavy buffer to compare in their rigs with adj gas? Time will tell I guess. ?
  3. jasonfaz

    Confused MATEN .308 and Vltor A5 tube

    Dude... M41 Muzzle Brake - Precision Armament
  4. jasonfaz

    Suppressors Can for 308 SBR?

    FWIW, I shoot a 10.5" and 11.5" 5.56 (129-130 db avg), an 18" .338 Fed (131-132 db avg) a 20" 6.5 Gendel (132-133 db avg) using supers with no ear pro. Zero issues if you use a quality can, tune the rifle, and shoot the appropriate ammo. My 8.2" 300 BLK with subs rings in at 117 db avg with 185s...
  5. jasonfaz

    6.5 creedmoor SPR Build

    Right. Like I said, the less gas you have pushing your BCG through a cycle the more you have exiting through the end of your barrel. Shooting suppressed, I very much prefer using a heavier carrier and heavier buffer using a proportionately equal amount of gas to move that heavier weight thereby...
  6. jasonfaz

    6.5 creedmoor SPR Build

    Not really. Why then does David Tubb make a carrier weight system? Or why would the SCAR17's recoil be so mild with its massive reciprocating mass? Why would PWS make an enhanced DI AR15 carrier that's nearly equivalent to a standard M16 with CWS installed? Because it increases felt recoil? I...
  7. jasonfaz

    Confused MATEN .308 and Vltor A5 tube

    The spacer is for rifle length receiver extensions. You would have to cut 1.95" off of the spacer for the SCS to work as designed in a 7.75" tube. And like you said, upon doing so you'd loose most the benefit of an A5 length tube anyway by reducing length of travel. I've used it in an A5 and...
  8. jasonfaz

    First Kryptek attempt....jury is still out

    Extremely stable, but no cheek weld. As in ZERO. I kinda prefer the LWRC UCIW set up over this from a comfort standpoint, but the NEA looks cooler. For whatever that's worth...
  9. jasonfaz

    Confused MATEN .308 and Vltor A5 tube

    Yes. Vltor describes their RE-10/A5 in the context of Armalite buffer tubes and carbine buffers when using on 308. Armalite carbine buffer tubes are 7 3/4" and buffers are 3 1/4". So you are good with the XH and Slash's spring. The JP SCS won't work in an A5 length buffer tube. JP should come...
  10. jasonfaz

    Gap 10

    Don't you just need a bullet button to be Kali compliant? That flow chart out there for identification of CA compliant rifles is so f'ing crazy it boggles my mind. Feel sorry for you guys...
  11. jasonfaz

    6.5 creedmoor SPR Build

    Nice build LVMED! Very nice set up all around. 6brshooter, you should start another thread on the adj GB/heavy buffer issue to avoid hijacking the thread. Outside of the threaded brake LV has on his rig insinuating he's shooting both suppressed and non (or at least planning on it in the...
  12. jasonfaz

    Suppressors Can for 308 SBR?

    In that case (depending on actual barrel length - 12" min - and loads you're going to shoot) you may want to think about a lighter titanium brake-attach can. I use an AAC MK13-SD on a 12" POF 308 and it's been great. Very accurate baffle stack design and very quiet. I definitely don't push the...
  13. jasonfaz

    Suppressors Can for 308 SBR?

    Knights QDC, Spec War, Saker, AWC THOR (Stainless steel version), AAC has a few. What's your firing schedule going to look like?
  14. jasonfaz

    First Kryptek attempt....jury is still out

    ....and surprisingly, the total length of this 300 BLK is a little more than 3/4" shorter than my 12" 308 upper by itself. Kinda made me laugh just looking at this:
  15. jasonfaz

    Just curious?

    Yea, those caliber argument threads tend to stray off of the original topic pretty quickly. At the time, that Grendel had a Black Hole Weaponry 18", heavy contour, rifle gas, octagonal fluted, stainless, 1 in 8" twist barrel. I've since tried a few others - JPs light contour, and just got my...
  16. jasonfaz

    First Kryptek attempt....jury is still out

    It's a chopped up NEA PDW stock. Had to cut the right side down so that it'd fully collapse just short of the right side bolt catch, replace the shitty tension pins in the rear, swap out the spring and release button to adjust LOP, and mill three additional notches into the locking bars to get...
  17. jasonfaz

    First Kryptek attempt....jury is still out

    Perfect. I need to get to filing that patent!
  18. jasonfaz

    Just curious?

    Well shit, perfect timing. There is one for sale in the classifieds section of this site for $3500. Just went up...
  19. jasonfaz

    First Kryptek attempt....jury is still out

    I know it dude. It was so scary I had to close my eyes when I did it. That was also an idea that I came up with after the second bottle of whiskey. Glad it turned out ok. :-)
  20. jasonfaz

    Just curious?

    This might be a good thread to read. Starts out as 6.5 Grendel vs 6x45, but ends up at 6.5G vs 6mmAR. http://www.snipershide.com/shooting/snipers-hide-semi-auto-rifles/246751-6x45mm-vs-6-5-grendel.html?highlight=6mmAR
Top Bottom
Back
Home
Forums
Merch
Alerts