Search results

Search the forum Search Articles
  1. S

    Takes a lot to impress people these days

    Re: Takes a lot to impress people these days I get it SGT. I was thinking the same thing when I saw Looper yesterday. The "Loopers" were using blunderbusses and the criminals had guns. There was no mention of police, people were starving and living in the streets, and the theme was basically...
  2. S

    Moving from tumbling to ultrasonic ! suggestions?

    Re: Moving from tumbling to ultrasonic ! suggestions? I use an ultrasonic and have tried a couple techniques. I like it. Below is my process. About a 40 case of lemishine. A couple drops of dish soap. Tap water. After I run the ultrasonic I pull the cases out and just roll them in a rag...
  3. S

    Method on marking brass for amount of reloads?

    Re: Method on marking brass for amount of reloads? I have used a sharpie marker before to color in the extractor ring. This comes off after being tumbled though. I think I have read before about using nailpolish to color the ring also. They say it holds up in the tumbler.
  4. S

    Ar15 resizing question.

    Re: Ar15 resizing question. Do the rounds that stick fit in the other ar? If so I would say you need a small base die. You could try to screw the die in a bit more, but I had the same problem and the die could not go any farther into the press and still had the same issue. In my case, and...
  5. S

    Questions about your 308 FPS

    I finally got a chronograph to test my loads. I have been loading for a while now and have only been looking for the most accurate load, but now I have some numbers. I am wondering what speeds you guys with 18" Gas guns are getting? I chronoed a load I have been using today and averaged out at...
  6. S

    .308 reloading for semi-auto

    Re: .308 reloading for semi-auto I own and reload for a gap 10 and I too had some lapua cases. I am at 5 loadings now without any issue. Possible the GAP is less tough on the brass? I know some other 308 spit out some ugly brass, but my rifle is working well with the lapua. With it being a...
  7. S

    LMT MWS + TBAC 30-BA = Bliss

    Re: LMT MWS + TBAC 30-BA = Bliss K4- even though my rifle has the gas block it will not cycle the subsonic load (I dont expect it to) I just turn it to the off position when shooting those. BUT with the supersonic loads it makes all the difference.
  8. S

    LMT MWS + TBAC 30-BA = Bliss

    Re: LMT MWS + TBAC 30-BA = Bliss I shot that EXACT same load today through my GAP-10 with a surefire. I had good hits at 300.... 18 min up lol. Took a long tome to get there but it would hit it. That video portrays it as quiet, but it really doesnt to it a justice. Thanks for the vid K4!
  9. S

    Hornady LNL Progressive and 223-what powder?

    Re: Hornady LNL Progressive and 223-what powder? I use varget mainly on my LNL AP for 223, but am slowly moving over to XBR 8208. I think it meters better and works great in my ARs. I use standard CCI small rifle primers. Never had an issue. I dont crimp. For pistol I have used HS6 and...
  10. S

    Suppressors Surefire 762SS Question

    I have a Surefire 762SS and I was noticing something at the range yesterday. I am wondering if there is anything to this or if it was just happenstance. When I first put the can on the rifle I began to shoot groups. The POI was a little low left and the groups were larger than typical of the...
  11. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock Thumper, I think you hit it exactly right on the head. I had a lemon of an experience. I believe this was most likely an isolated event and probably does not reflect the norm at GAP. Stuff happens. This was just my experience and may not reflect any one else's past or...
  12. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock George, We did speak personally about the problem I had. I think you guys did an awesome job getting this back to me and I think that I did recieve above and beyond service. We talked in legnth about my situation from order to delivery. You did apologize and set me at...
  13. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock Broker, no matter how you combine the TWO problems I have had with ONE transaction, the COMBINATION of the issues was the problem. One without the other may not have been as big a deal, but two shitty circumstances with one transaction is unnaceptable IMO without...
  14. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: R6Hybridd</div><div class="ubbcode-body">Question for you sic, if you were quoted 4 months and you got in in 2 months, should they expect you to pay more? Just looking at it the other way...
  15. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Broker</div><div class="ubbcode-body">I love how you're trying to turn it into an issue where it's more about the delay than the repair itself. The whole point of this thread was the issue...
  16. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock Sloth, that statement was intended to mean what is the point of an estimated delivery date if a consumer doesn't care when they get it, just that they get it? I by no means expected the 2-4 month estimate to be 100% accurate, I did not however expect the actual...
  17. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock BM11, I completely agree with you. Thank you for saying what you thought. IMO just because we are used to little or lackluster service should that be acceptable? Maybe I believe in a higher standard. I just feel both sides should be told, and consumers should not be...
  18. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock The estimated date is a mute point if it has no functional basis. I guess some of you are happy with what you order, whenever you get it, even if its wrong and it gets fixed; as long as sometime in the future you get it. That makes no sense to me. I did want the...
  19. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock Broker, It didnt have to be a phone call. It could have been a simple email string that would have taken not too long to compile and write up. I am impressed that they fixed the rifle in one day, and I am impressed they paid fully for the shipping. I know George came...
  20. S

    Noveske Switchblock *GAP -10 UPDATE*

    Re: Noveske Switchblock <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jon Lester</div><div class="ubbcode-body">Not that you do or dont have a gripe but the delays were posted all over this site and to anyone who bothered to even try to talk with anyone at GAP...
Top Bottom
Back
Home
Forums
Merch
Alerts