Search results

Search the forum Search Articles
  1. B

    Badger lugged scope base

    Re: Badger lugged scope base My lugged Badger is not interrupted. Looks like the Seekins in your pic.
  2. B

    Gunsmithing Clip slotting

    Re: Clip slotting <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Northland</div><div class="ubbcode-body">Is that the Badger or Ross? </div></div> It is a Badger, Dan Ross wouldn't sell his mount unless he did the full build on the rifle. I don't know if that...
  3. B

    Gunsmithing Clip slotting

    Re: Clip slotting It is somewhat like a later M40 with an A4, Ross bottom metal, etc, but I mainly just wanted a build with a clip slotted mount. I placed the loctite on the bottom of the base and top of receiver when I was tapping it into the slotted recess machined into the receiver. Here...
  4. B

    Gunsmithing Clip slotting

    Re: Clip slotting When I received mine from GAP, it was so tight any adhesive would have been redundant. The spec change to 8-40 screws and the flat rear bridge made it rock solid as could be. All I did was the standard green loctite under the base to keep moisture out in the event the...
  5. B

    Gunsmithing Shilen Ratchet Rifling

    Re: Shilen Ratchet Rifling I have two 1:8 twist ratchet-rifled .223's. One on a .223 Rem and a .223 AI and they are both true hammers. What I was told is the four groove engraves the jacket less in comparison to a six groove improving long range ballistics. I don't know if the difference...
  6. B

    Gunsmithing Alabama smith's?

    Re: Alabama smith's? I have used Mickey Coleman before. He builds a damn good rifle. UPS'ed everything though, dunno where in Alabama he is. Mickey's webpage
  7. B

    Gunsmithing Reamers on Sale

    Re: Reamers on Sale 6mmBR link
  8. B

    Remington m700p big problems

    Re: Remington m700p big problems I have seen this happen before. Buddy got a box of 30'06 once that had a bad round. Turns out after Remington looked at it that the cartridge had been manufactured without a flashhole in the primer pocket.
  9. B

    Favorite Powder for 52gr./53gr. Bullets?

    Re: Favorite Powder for 52gr./53gr. Bullets? I have had really outstanding success with the Sierra 53gr flat base Matchking and H335. I am away from my load book and records, but when I get back in Tuesday, I will repost.
  10. B

    308 subsonic loads for 1/12 twist

    Re: 308 subsonic loads for 1/12 twist I'll give you my experience, but understand that all rifles are different in some way and to exercise caution when developing subsonic loads. This is some info I have gathered from 'Hide users and some investigating on my own with a little load...
  11. B

    Suppressors SRT Titanium .308 any owners out there?

    Re: SRT Titanium .308 any owners out there? Guys, thanks for your assistance, got my second SRT suppressor ordered. Looking forward to receipt of the Shadow Ti. Doug is top-notch to deal with. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: smokshwn</div><div...
  12. B

    Suppressors SRT Titanium .308 any owners out there?

    Re: SRT Titanium .308 any owners out there? Guys, thanks a TON for the feedback. This is exactly the kind of info I need and very helpful. Doug made me a custom stainless steel Hurricane awhile back for a .223AI, and I have been seriously pleased with it. It has also been quite accuracy...
  13. B

    Suppressors SRT Titanium .308 any owners out there?

    Looking for feedback specific to the SRT Shadow Ti model. Particularly the effect on <span style="font-style: italic">accuracy</span>. Thanks!
  14. B

    Suppressors Sound reduction for a .308 suppressor??

    Re: Sound reduction for a .308 suppressor?? I'd take David's advice. Jerry is one of the nicest guys in the C3 business. Bought many a MG from him and handled transfers for some of his buyers. It would be well worth your time to visit his shop. There really is no substitute for checking...
  15. B

    Gunsmithing McMillian Remington Hunter stock

    Re: McMillian Remington Hunter stock Never handled a Rem Hunter that I recall, but yes McMillan will send you a stock to handle if you pay S&H and give them a CC number. They are beyond awesome to deal with.
  16. B

    CM vs. SS barrels

    Does anybody have any idea how chrome moly and stainless barrels differ in stiffness or hardness? Say 4130 CM vs. 416 SS? I'm trying to understand how much bigger a stainless barrel would have to be to be as stiff as a chrome moly one. Say for instance is a stainless #7 contour as stiff as a...
  17. B

    Duracoat FDE problems...frustrations

    Re: Duracoat FDE problems...frustrations Not Duracoat, but I've used Norrell's Moly-Resin and like it far better. His color is authentic, I've used it several times. Norrell's Link Look for Tan flat on the webpage.
  18. B

    Gunsmithing Rem 700 sear springs pre X-Mark

    Re: Rem 700 sear springs pre X-Mark Anybody???
  19. B

    Gunsmithing Rem 700 sear springs pre X-Mark

    Guys, looking for some sear springs. Checked Brownells, Midway, and the usual suspects with no luck. Brownell's search engine sucks, thinking maybe somebody has a part number... Also checked McMaster-Carr's spring selection and find larger and smaller diameters, but nothing close enough to...
  20. B

    Gunsmithing Marine Tex - Release agent ?

    Re: Marine Tex - Release agent ? Kiwi neutral paste.
Top Bottom
Back
Home
Forums
Merch
Alerts