Search results

Search the forum Search Articles
  1. C

    Suppressors Thunder Beast lead times...

    Again with my favorite quote from you , just because you don't see it doesn't mean it isn't happening. Fluid dynamics are fluid dynamics and just because your favorite suppressor doesn't say it exists doesn't suspend physics . Why don't you call your messiah up and ask them why they limit...
  2. C

    Suppressors Thunder Beast lead times...

    Side by side comparison
  3. C

    Suppressors Thunder Beast lead times...

    Another suppressor 101 lesson , today's topic unsecured baffles in a tube on a center fire rifle suppressor. The baffles and tube expand and contract at different rates causing what is a tolerance fit cold to open up and allow the baffle stack to move inside the tube when the rifle is fired ...
  4. C

    Suppressors Thunder Beast lead times...

    Maybe you'll get an answer this time but I suspect we both know the response you'll receive. Good luck .
  5. C

    Suppressors Thunder Beast lead times...

    What was the quote again from the other thread, just be pause you dont see it doesn't mean it isn't happening or words to that affect . Just because your eye says the threads look ok , which they are probably serviceable at this point , does not mean they are not stretching and wearing it is...
  6. C

    Suppressors Thunder Beast lead times...

    A little lesson on suppressor construction , what is stronger a properly welded joint or extra fine threads in thin wall tubing ? And if you said good weld's you are correct . Adding threaded joints to a suppressor that is totally dependent on the tube for it's strength is adding points of...
  7. C

    Suppressors Thunder Beast lead times...

    Nothing more repeatable blah blah , time for you to put up or shut up . More repeatable than this , Pretty sure the response will be like last time , and you'll be too busy , important , or whatever to back up your BS .
  8. C

    Suppressors Suppressor blew up

    There is no physical way your suppressor got hot enough to vaporize the materials in antiseize because if they had it would have catastrophically damaged both the barrel and suppressor. 2500 deg F would have destroyed the barrel and suppressor .
  9. C

    Suppressors Suppressor blew up

    I'll just leave this here about bore obstruction, guess we'll see how this is explained away too . If there was a bore obstruction in the OP can why is there no evidence of any impact in the picture of the inside of the suppressor ?
  10. C

    Suppressors Suppressor blew up

    BS , YUP I'LL WAVE THE FLAG There is absolutely no way the suppressor got hot enough to cause the materials in anti seize to flow , typically nickel , copper , or glass beads , let alone vaporize and coat the entire inside of the suppressor and crown . All the other chemicals in anti seize are...
  11. C

    Suppressors pressure washer for rifle can

    Pressure washer works quite well especially when used in conjunction with one of the chemical soak methods . The muzzle pressure on a centerfire rifle is going to be typically in the 10 - 15K psi range depending on caliber and barrel length , 1800 psi pressure washer is well below that.
  12. C

    Suppressors Thunder Beast vs?

    Hmm , I wonder where this quote came from , " Just because you have never heard of a phenomenon does not mean it does not exist. " more hypocrisy it would seem .
  13. C

    Suppressors Thunder Beast vs?

    Oh the hypocrisy , you call people out but refuse to demonstrate your claims , nice . You still haven't addressed the picture of the rifle barrels that were posted back on the the 1st page that you called a " target picture " . Ray is not saying there is no build up he is saying there has...
  14. C

    Suppressors Thunder Beast vs?

    So here you say that you can't hold groups better than .4 MOA with YOUR dirty can and again a couple posts down you're talking about barely holding 1 MOA with a dirty can and now you're saying that no they hold .4 - .5 just fine it's only when you want ultimate accuracy and shoot .3s off the...
  15. C

    Suppressors Thunder Beast vs?

    If the picture looks like a target to you I can recommend a good optometrist.
  16. C

    Suppressors Thunder Beast vs?

    Both those barrels were sub 1/2 MOA on paper and never had any issues holding way better than 1 MOA out in the dirt in the field , hmm can it be so ?
  17. C

    Suppressors Thunder Beast vs?

    Wanna say 5 or 6 ish
  18. C

    Suppressors Thunder Beast vs?

    Nope nary a one
  19. C

    Suppressors Thunder Beast vs?

    Well Zak conventional wisdom says not so much BUT in reality and in person observation my answer would be yes the rifle was shooting quite well that weekend , dude is all about pictures does it still exist ?
  20. C

    Suppressors Thunder Beast vs?

    Pretty sure someone on here has no clue who they are corresponding with . And no the carbon does not build evenly across the face of a baffle would you like pictures ?
Top Bottom
Back
Home
Forums
Merch
Alerts