Search results

Search the forum Search Articles
  1. C

    Rifle Scopes USO SN3 no.1 mil/moa ret/clicks?

    Those are marked MOA but could be and most likely are IPHY , USO made both and used them interchangeably sometimes both in 1 scope . Same issues with their " MOA " reticules . Only way to know for sure is to put it on paper and box test it .
  2. C

    Suppressors Do you clean your suppressor?

    Here is something to think about, The rim fire shooters and some benchrest shooters as well tune their rifles by adding / moving weights around on the muzzle of the rifle , fractions of an ounce . What does a random amount of constantly changing weight of both position and amount do the barrel...
  3. C

    Suppressors Do you clean your suppressor?

    Don't use any of the acidic cleaners CLR , Simple Green , Purple Power , etc on aluminum and some steels because it will damage them .
  4. C

    Suppressors Ultra 7 10.5oz Heavy after 28k rounds of 6.5 CM

    Pretty sure up above Zak posted it would take " months " to get this cleaned Correction he said hundreds of cycles
  5. C

    Suppressors Ultra 7 10.5oz Heavy after 28k rounds of 6.5 CM

    Mil spec left side , mil spec right side , and shooters ear . It's where the sound meter was set up for testing and the numbers are decibels.
  6. C

    Suppressors Ultra 7 10.5oz Heavy after 28k rounds of 6.5 CM

    CLR doesn't do anything to Ceracote but it will take off bluing and black oxide finishes for sure .
  7. C

    Suppressors Ultra 7 10.5oz Heavy after 28k rounds of 6.5 CM

    CLR will damage stainless. I use a plastic graduated cyl from online that a buddy hooked me up with . A Lays potato chip can is appropriately sized also . The pressure washer part of the process is the magic ticket not just the soaking .
  8. C

    TBAC BIPOD

    I can easily put enough tension on the cant pivot that I can't move the rifle in a firing position without having to break position and loosen an readjust the rifle and rebuild the position . Not sure what you are doing that the bipod can't be locked up tight enough.
  9. C

    Suppressors PSA - On Cleaning Rifle Silencers - With Cutaways at 12,800rds

    The problem with damaging the anodizing on aluminum is it is the hardness and wear resistance, unanodized aluminum is soft and easily damaged
  10. C

    Suppressors PSA - On Cleaning Rifle Silencers - With Cutaways at 12,800rds

    Soak in preferred carbon busting chemical , be careful with aluminum because the chemicals containing acids will damage it and blast it out with a pressure washer and rinse and repeat until clean .
  11. C

    Monthly Sporting Rifle match RATON NM

    The other thing I distinctly remember happening more than once were people leaving early so as to not miss some batch of self important millionaires play some sports ball game , typically the same people that never help with set up or tear down or target / course maintenance. Pretty sure if the...
  12. C

    Monthly Sporting Rifle match RATON NM

    Hate to disagree Dorgan but there have never been more than 73 shooters and that only happened 2 times , I was present at both . Both times we did not finish up and leave the range until after 18:00 .
  13. C

    Gunsmithing Thinking the Smith screwed my barrrel

    " Machinist fit " translates to too cheap to buy the proper tooling to measure the threads with and too lazy to look up the thread specification in the " machinists " handbook . There are specifications for different thread types and fits for a reason . The way to check threads is with proper...
  14. C

    Gunsmithing Thinking the Smith screwed my barrrel

    Threading by using the attachment as the gauge is wrong , the threads to be correct either need checked with a thread gauge or precision measuring tools such as a thread micrometer or thread wires . Best bet is to cut your losses and cut the barrel and start over with someone who has the proper...
  15. C

    TBAC BIPOD

    Yes the one I got came with leg extensions and spike feet .
  16. C

    TBAC BIPOD

    Best I got right now
  17. C

    TBAC BIPOD

    I was one of the testers , speaking with Shane they are cranking things out now and like Zak said above there are a bunch shipping out for the first batch .
  18. C

    TBAC BIPOD

    Yes I did
  19. C

    TBAC BIPOD

    Bipods are in the wild mine showed up today and is of the typical attention to detail that TBAC has always demonstrated , fine piece of work.
  20. C

    Suppressors Need some help with TBAC can

    Red Loctite is what TBAC says to use
Top Bottom
Back
Home
Forums
Merch
Alerts