Search results

Search the forum Search Articles
  1. Strike_out

    Proof cf 24"7tw for impact action 223 Rem

    PM sent
  2. Strike_out

    Tikka T3 Thread

    It is a stamped tikka bbl I will measure though and look at the bottom of the action. Not too sure if you’ll be able to tell as there has been quite a bit of material removed on the bottoms to make the bottom metal and mags fit. It is a little rough under there. I’ll get pics shortly the riffle...
  3. Strike_out

    Tikka T3 Thread

    It is a 1:8 I have load tested both the 75 and 80 and the 75 does real well with Varget. What’s your distance from the lands?
  4. Strike_out

    Tikka T3 Thread

    So I have a concern about barrel. It’s the factory barrel and about 3/4 of the way down the barrel when pushing a patch or brush through there is a smooth spot about 2 inches that give little resistance then goes back to normal till the crown. Any ideas?
  5. Strike_out

    Tikka T3 Thread

    I picked this 223 up from mile high used....it’s my first tikka. It has a 20” bbl what model would it be?
  6. Strike_out

    Kahles 624i Gen 3 LSW SKMR3 w/ extras

    Have any rings to go with?
  7. Strike_out

    130 Berger Hybrids with H4350 and IMR4451 (RPR 6.5 CM PVA BARREL)

    Prime
  8. Strike_out

    130 Berger Hybrids with H4350 and IMR4451 (RPR 6.5 CM PVA BARREL)

    H4350 Berger 130 43.5gr 2.820col Shoots real nice
  9. Strike_out

    Anyone work up a load with 80gr ELD-m in 223 yet?

    Factory Tikka T3 chamber 1:8 twist Note that I haven’t tried them seated any deeper than .040 off
  10. Strike_out

    **6 Creedmoor**

    Why not?
  11. Strike_out

    Anyone work up a load with 80gr ELD-m in 223 yet?

    With the 75s in my rifle they shoot tightest just off the lands. I load them 2thou off
  12. Strike_out

    Lapua Brass not growing/needing trim

    6.5CM shooting prime brass I could fire it three times before needing a trim
  13. Strike_out

    Powder recommendations for Shorty 6 Creedmoor 16.5”

    I want to say cfe223 but I think it might gum up your can more than you would want
  14. Strike_out

    Why do we do PRS? ?

    It’s a “buddy fucker” Jeff...
  15. Strike_out

    Anyone work up a load with 80gr ELD-m in 223 yet?

    Are you still running this charge? What kind of SD are you getting?
  16. Strike_out

    Anyone work up a load with 80gr ELD-m in 223 yet?

    That’s what I was think might be the case. The 75’s shoot nice with 26.6 CFE23 at 2860 and I don’t think the 80 would be as effective at say 2700. Maybe the 80 would be a good fit for the 223ai and a longer barrrel then my 20”
  17. Strike_out

    Anyone work up a load with 80gr ELD-m in 223 yet?

    I have been having good success with the 75 eld in my T3. Loading them long I can get 2800+ pretty easy and good accuracy. Sounds like I won’t loose much speed if I moved to the 80. Anybody shot both?
  18. Strike_out

    22 Cal ELD-M bullets

    Tested seating depth with the 75eld at .002 .012 and .022 off the lands with the obvious winner being .002 They want to be right up in there in my 223 tikka
  19. Strike_out

    223 bolt gun 75-80 gr no ackleys

    How does this group for you at 100 and further? what kind of sd es do you get?
  20. Strike_out

    223 bolt gun 75-80 gr no ackleys

    Tikka 20” factory 1:8 75 eld OAL 2.495 10 thou off 26.6 gr cfe223 cci 400 win brass 2960
Top Bottom
Back
Home
Forums
Merch
Alerts